Pioneer MODE D'EMPLOI DEH-P780MP User Manual download pdf (Page 56)

Fader (balance adjustment)—Position (posi-

tion selector)—TA Mode (time alignment set-

ting)—Time Alignment (time alignment

adjusting)—Loudness (loudness)—Powerful

(graphic equalizer adjustment)—FREQ. (16-

band graphic equalizer adjustment)—

Subwoofer1 (subwoofer on/off)—

Subwoofer2 (subwoofer cut-off frequency)—

Subwoofer3 (subwoofer slope)—Front HPF

(front high pass filter slope)—

Front HPF FREQ. (front high pass filter cut- off

frequency)—Rear HPF (rear high pass filter

slope)—Rear HPF FREQ. (rear high pass filter

cut-off frequency)—BBE (BBE)— COMP/BMX

(Compression and BMX)—SLA (source level

adjustment)—AUI sound level (auditory user

interface)

# When selecting OFF in TA Mode, you cannot

switch to Time Alignment.

# You can select Subwoofer2 and

Subwoofer3 only when subwoofer output is

turned on in Subwoofer1.

# When tuner, television or AUX is selected as a

source, you cannot select COMP/BMX.

# When selecting the FM tuner as the source,

you cannot switch to SLA.

# To return to the display of each source, press

BAND.

Note

If you do not operate the audio function within

about 30 seconds, the display is automatically re-

turned to the source display.

Using the position selector

One way to assure a more natural sound is to

clearly position the stereo image, putting you

right in the center of the sound field. The posi-

tion selector function lets you automatically

adjust the speakers’ output levels and inserts

a delay time to match the number and posi-

tion of occupied seats.

1 Use MULTI-CONTROL to select Position.

Position appears in the display.

2 Push MULTI-CONTROL left, right, up or

down to select a listening position.

Direction Display Position

Left Front Left Front seat left

Right Front Right Front seat right

Up Front Front seats

Down All All seats

# To cancel the selected listening position, push

MULTI-CONTROL in the same direction again.

Using balance adjustment

You can change the fader/balance setting so

that it can provide you an ideal listening envir-

onment in all occupied seats.

1 Use MULTI-CONTROL to select Fader.

Fader appears in the display.

# If the balance setting has been previously ad-

justed, Balance will be displayed.

2 Push MULTI-CONTROL up or down to

adjust front/rear speaker balance.

Each time MULTI-CONTROL is pushed up or

down, the front/rear speaker balance moves

towards the front or rear.

Front 25 to Rear 25 is displayed as the front/

rear speaker balance moves from front to rear.

# Front/Rear 0 is the proper setting when only

two speakers are used.

3 Push MULTI-CONTROL left or right to

adjust left/right speaker balance.

Each time MULTI-CONTROL is pushed left or

right, the left/right speaker balance moves to-

wards the left or right.

Left 25 to Right 25 is displayed as the left/

right speaker balance moves from left to

right.

Audio Adjustments

En

56

Section

13

1 ... 55 56 57 ... 167

Comments to this Manuals

No comments