Pioneer MODE D'EMPLOI DEH-P780MP User Manual download pdf (Page 61)

Powerful—Natural—Vocal—Flat—Custom1

—Custom2—Super Bass

3 Push MULTI-CONTROL up or down to

adjust the equalizer curve.

Each time MULTI-CONTROL is pushed up or

down, the equalizer curve increases or de-

creases respectively.

+6 to –6 is displayed as the equalizer curve is

increased or decreased.

# The actual range of the adjustments are differ-

ent depending on which equalizer curve is se-

lected.

# The equalizer curve with all frequencies set to

0 cannot be adjusted.

Adjusting 16-band graphic

equalizer

For Custom1 and Custom2 equalizer curves,

you can adjust the level of each band.

! A separate Custom1 curve can be created

for each source. (The built-in CD player and

the multi-CD player are set to the same

equalizer adjustment setting automati-

cally.) If you make adjustments when a

curve other than Custom2 is selected, the

equalizer curve settings will be memorized

in Custom1.

! A Custom2 curve can be created common

to all sources. If you make adjustments

when the Custom2 curve is selected, the

Custom2 curve will be updated.

1 Recall the equalizer curve you want to

adjust.

See Recalling equalizer curves on the previous

page.

2 Use MULTI-CONTROL to select 16-band

graphic equalizer adjustment.

FREQ. appears in the display.

3 Push MULTI-CONTROL left or right to

select the equalizer band to adjust.

Each time MULTI-CONTROL is pushed left or

right, equalizer bands are selected in the fol-

lowing order:

20—31.5—50—80—125—200—315—500—

800—1.25k—2k—3.15k—5k—8k—12.5k—

20k (Hz)

4 Push MULTI-CONTROL up or down to

adjust the level of the equalizer band.

Each time MULTI-CONTROL is pushed up or

down, the level of the equalization band in-

creases or decreases.

+6 to –6 is displayed as the level is increased

or decreased.

# You can then select another band and adjust

the level.

5 Press BAND to cancel the 16-band gra-

phic equalizer adjustment.

Using BBE sound

With BBE, playback very close to the original

sound can be obtained by correction with a

combination of phase compensation and

high-range boost for the delay of the high-fre-

quency components and the amplitude devia-

tion occurring during playback. This function

makes it possible to reproduce the dynamic

sound field as if you are listening to a live per-

formance.

With BBE sound processing technology, you

can adjust the level of BBE.

1 Use MULTI-CONTROL to select BBE.

BBE appears in the display.

2 Press MULTI-CONTROL to turn BBE on.

# To turn BBE off, press MULTI-CONTROL

again.

Audio Adjustments

En

61

English

Section

13

1 ... 60 61 62 ... 167

Comments to this Manuals

No comments