Pioneer VSX-1125-k User Manual download pdf (Page 36)

Connecting your equipment

Switching components on and off using

the 12 volt trigger

(VSX-1325 only)

You can connect components in your system (such as a

screen or projector) to this receiver so that they switch on

or off using 12 volt triggers when you select an input

function. However, you must specify which input

functions switch on the trigger using the The Input Setup

menu on page 39. Note that this will only work with

components that have a standby mode.

• Connect the

12 V TRIGGER

jack of this receiver to

the 12 V trigger of another component.

Use a cable with a mono mini-plug on each end for the

connection.

After you’ve specified the input functions that will switch

on the trigger, you’ll be able to switch the component on

or off just by pressing the input function(s) you’ve set on

page 39.

It is also possible to have the component switch not when

the input function is switched, but when HDMI OUT is

switched. For details, see HDMI Setup on page 56.

Plugging in the receiver

Only plug in after you have connected all your

components to this receiver, including the speakers.

1 Plug the supplied power cord into the

AC IN

socket

on the back of the receiver.

2 Plug the other end into a power outlet.

CAUTION

• Handle the power cord by the plug part. Do not pull

out the plug by tugging the cord, and never touch the

power cord when your hands are wet, as this could

cause a short circuit or electric shock. Do not place

the unit, a piece of furniture, or other object on the

power cord or pinch the cord in any other way. Never

make a knot in the cord or tie it with other cables. The

power cords should be routed so that they are not

likely to be stepped on. A damaged power cord can

cause a fire or give you an electric shock. C

heck the

power cord once in a while. If you find it damaged,

ask your nearest Pioneer authorized independent

service company for a replacement.

•Do not use any power cord other than the one

supplied with this unit.

• Do not use the supplied power cord for any purpose

other than that described below.

•The receiver should be disconnected by removing the

mains plug from the wall socket when not in regular

use, e.g., when on vacation.

•Make sure the blue  STANDBY/ON light has gone

out before unplugging.

• If you have connected speakers with a 6

impedance, change the impedance setting before

turning on the p ower .

RS-232C

HDMI

SPEAKERS

ASSIGNABLE

COMPONENT VIDEO

ASSIGNABLE

MONITOR

OUT

ANTENNA

FM UNBAL 75 AM LOOP

ZONE2

OUT

ZONE3

OUT

DVD

TV/SAT

VIDEO

DVR/BD

OUT

INBD

FRONT

1 4

(

DVD

)

(

DVR/BDR

)

CONTROL

EXTENSION

12 V TRIGGER

IN IN

OUT

OUT12

(OUTPUT 12 V

TOTAL 150 mA MAX)

(

OUTPUT

5 V

150 mA

MAX

)

Class 2 Wiring

12 V TRIGGER

INPUT

Note

1After this receiver is connected to an AC outlet, a 2 second to 10 second HDMI initialization process begins. You cannot carry out any

operations during this process. The HDMI indicator in the front panel display blinks during this process, and you can turn on this receiver

once it has stopped blinking. When you set the Control with HDMI to OFF, you can skip this process. For details about the Control with HDMI

feature, see Control with HDMI function on page 56.

VSX-1325_UXJCB.book 36 ページ２０１０年３月９日　火曜日　午後３時４分

1 ... 35 36 37 ... 112

Comments to this Manuals

No comments

Pioneer VSX-1125-k User Manual Page 36

Comments to this Manuals

Related products and manuals for AV receivers Pioneer VSX-1125-k