Pioneer VSX-1125-k User Manual download pdf (Page 60)

Using other functions

LFE

(LFE

Attenuate)

Some audio sources include

ultra-low bass tones. Set the LFE

attenuator as necessary to

prevent the ultra-low bass tones

from distorting the sound from

the speakers.

The LFE is not limited when set to

0 dB, which is the recommended

value. When set to –5 dB, –10 dB,

–15 dB or –20 dB, the LFE is

limited by the respective degree.

When OFF is selected, no sound

is output from the LFE channel.

0dB

/ –5dB/

–10dB/ –15dB/

–20dB

OFF

SACD

GAIN

Brings out detail in SACDs by

maximizing the dynamic range

(during digital processing).

0dB

+6 dB

HDMI

(HDMI

Audio)

Specifies the routing of the HDMI

audio signal out of this receiver

(amp) or through to a TV. When

THROUGH is selected, no sound

is output from this receiver.

AMP

THROUGH

A. DELAY

(Auto

delay)

This feature automatically

corrects the audio-to-video delay

between components connected

with an HDMI cable. The audio

delay time is set depending on the

operational status of the display

connected with an HDMI cable.

The video delay time is

automatically adjusted according

to the audio delay time.

OFF

C. WIDTH

(Center

Width)

(Applicable

only when

using a

center

speaker)

Provides a better blend of the

front speakers by spreading the

center channel between the front

right and left speakers, making it

sound wider (higher settings) or

narrower (lower settings).

0 to 7

Default: 3

DIMENSION

Adjusts the depth of the surround

sound balance from front to back,

making the sound more distant

(minus settings), or more forward

(positive settings).

–3 to +3

Default: 0

PANORAMA

Extends the front stereo image to

include the surround speakers for

a ‘wraparound’ effect.

OFF

C. IMAGE

(Center

Image)

(Applicable

only when

using a

center

speaker)

Adjusts the center image to

create a wider stereo effect with

vocals. Adjust the effect from 0

(all center channel sent to front

right and left speakers) to 10

(center channel sent to the center

speaker only).

0 to 10

Defaults:

Neo:6 MUSIC:

Neo:6

CINEMA: 10

EFFECT Sets the effect level for the

currently selected Advanced

Surround or ALC mode (each

mode can be set separately).

10 to 90

Setting What it does Option(s)

H.GAIN

(Height

Gain)

Adjusts the output from the front

height speaker when listening in

DOLBY PLIIz HEIGHT mode. If set

to HIGH, the sound from the top

will be more emphasized.

LOW

MID

HIGH

V.SB

(Virtual

Surround

Back)

When you’re not using surround

back speakers, selecting this

mode allows you to hear a virtual

surround back channel through

your surround speakers. You can

choose to listen to sources with

no surround back channel

information, or if the material

sounds better in the format (for

example, 5.1) for which it was

originally encoded, you can have

the receiver only apply this effect

to 6.1 encoded sources like Dolby

Digital EX or DTS-ES.

OFF

V.HEIGHT

(Virtual

Front

Height)

When you’re not using front

height speakers, selecting this

mode allows you to hear a virtual

front height channel through your

front speakers.

OFF

a.The adjustment can be made only when TONE is set to ON.

b.With the iPod/USB, INTERNET RADIO or ADAPTER PORT input

function, by default S.RTRV is set to ON.

c.UP1 to UP4 can be selected only when the front height speaker is

connected. The presence or absence of effects depends on the

listening mode.

d.The initially set AUTO is only available for Dolby TrueHD signals.

Select MAX or MID for signals other than Dolby TrueHD.

e.You shouldn’t have any problems using this with most SACD

discs, but if the sound distorts, it is best to switch the gain setting

back to 0 dB.

f. • The HDMI Audio setting cannot be switched while performing

synchronized amp mode operations.

• The synchronized amp mode must be turned on in order to play

the receiver’s HDMI audio and video input signals from the TV

with

the receiver’s power in the standby mode. See About synchronized

operations on page 57.

g.This feature is only available when the connected display supports

the automatic audio/video synchronizing capability (‘lipsync’) for

HDMI. If you find the automatically set delay time unsuitable, set A.

DELAY to OFF and adjust the delay time manually. For more details

about the lipsync feature of your display, contact the manufacturer

directly.

h.Only when listening to 2-channel sources in Dolby Pro Logic IIx

Music/Dolby Pro Logic II Music mode.

i. Only when listening to 2-channel sources in Neo:6 MUSIC/CINEMA

mode.

j. • You can’t use the Virtual Surround Back mode when the

headphones are connected to this receiver or when any of the

stereo, Front Stage Surround Advance, Sound Retriever Air or

Stream

Direct modes is selected.

• You can only use the Virtual Surround Back mode if the surround

speakers are on and the SB setting is set to NO or if Front Bi-Amp

or ZONE 2 is selected at Speaker System. It can also be used when

Speaker B is selected at Speaker system and SPAB is selected

with the SPEAKERS button.

• When inputting Dolby True HD, DTS-HD or DTS Express audio

signals, the Virtual Surround Back mode cannot be used if no

surround signals are recorded in the source.

Setting What it does Option(s)

VSX-1325_UXJCB.book 60 ページ２０１０年３月９日　火曜日　午後３時４分

1 ... 59 60 61 ... 112

Comments to this Manuals

No comments

Pioneer VSX-1125-k User Manual Page 60

Comments to this Manuals

Related products and manuals for AV receivers Pioneer VSX-1125-k