Pioneer ANH P9R Operations Manual download pdf (Page 27)

(1*/,6+

1DYLJDWLRQ

The internal system clock can be set to local time.

The current position can be saved and stored in the destination memory.

Language setting for the navigation system.

The display units can be changed from metres to yards.

Announcement of the estimated time of arrival can be switched on / off.

This setting controls the estimated average speed when driving on a motorway.

In order to achieve correct navigation on routes requiring guidance under time

restrictions and to calculate the estimated time of arrival, it is necessary to set the GMT

time transmitted from satellites to the current time zone.

By pressing the rotary stick or the multifunction button the time set is accepted.

The program returns to the system settings menu.

Select “TIME” in the system settings

menu and confirm.

Using the multifunction button or

the time can be changed from

the 24 hour to the 12 hour display.

Using the multifunction buttons

or the time is changed every half

an hour.

Confirm again by pressing the button.

Press the

button for more than 2 seconds to confirm the name entered. To

confirm, the small tick

can also be marked and the rotary stick briefly pressed.

The destination memory is automatically requested (see page 25).

Select the desired position in the destination memory using the rotary stick and press

the

button to confirm.

Using the multifunction button or

the time can be changed from

the 24 hour to the 12 hour display.

Select “SAVE POSITION” in the system

settings menu and confirm.

The current position, in degrees of

longitude and latitude, is displayed.

Enter the name of the position.

MAN-ANH-P9R-GB.fm Page 27 Tuesday, June 4, 2002 1:39 PM

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 55 56

No comments

Pioneer ANH P9R Operations Manual Page 27