Pioneer AVH-5300DVD User Manual download pdf (Page 10)

2

1

1 Side bracket (small)

2 Flush surface screw (5 mm × 6 mm)

2 Install the unit into the dashboard.

Insert the mounting sleeve into the dashboard.

And then secure the mounting sleeve by using

a screwdriver to bend the metal tabs (90°) into

place.

182

53

1

3

4

2

1 Dashboard

2 Mounting sleeve

3 Side bracket

4 Screw (2 mm × 3 mm)

DIN Rear-mount

1 Determine the appropriate position

where the holes on the bracket and the

side of the unit match.

When installing in a shallow space, use the

following screw holes.

1

1

1 Use binding screws (4 mm × 3 mm) only.

2 Tighten two screws on each side.

Use any of binding screws (4 mm × 3 mm),

binding screws (5 mm × 6 mm) or flush sur-

face screws (5 mm × 6 mm), depending on

the shape of screw holes in the bracket.

1

2

3

1 Screw

2 Dashboard or console

3 Factory radio mounting bracket

Note

In some types of vehicles, discrepancy may occur

between the unit and the dashboard. If this hap-

pens, use the supplied frame to fill the gap.

Removing the unit

Extend top and bottom of the trim ring out-

wards to remove the trim ring. And then loos-

en the screws (2 mm × 3 mm) to remove the

mounting sleeve.

! When reattaching the trim ring, push the

trim ring onto the unit until it clicks. (If the

trim ring is attached upside down, the trim

ring will not fit properly.)

En

10

Section

02

Installation

1 ... 9 10 11 ... 76

Comments to this Manuals

No comments