Pioneer DVH-P590MP User Manual download pdf (Page 17)

Storing the strongest broadcast

frequencies

BSM (best stations memory) lets you automa-

tically store the six strongest broadcast fre-

quencies under preset tuning buttons 1 to 6.

Once stored you can tune in to those frequen-

cies with the touch of button.

! Storing broadcast frequencies with BSM

may replace broadcast frequencies you

have saved using buttons 1 to 6.

1 Press FUNCTION to select BSM.

2 Press a to turn BSM on.

Six strongest broadcast frequencies will be

stored in the order of their signal strength.

# To cancel the storage process, press b.

Tuning in strong signals

Local seek tuning lets you tune in only those

radio stations with sufficiently strong signals

for good reception.

1 Press FUNCTION to select LOCAL.

2 Press a to turn local seek tuning on.

Local seek sensitivity (e.g., LOCAL 2) appears

in the display.

# To turn local seek tuning off, press b.

3 Press c or d to set the sensitivity.

There are four levels of sensitivity for FM and

two levels for MW/LW:

FM: LOCAL 1—LOCAL 2—LOCAL 3—

LOCAL 4

MW/LW: LOCAL 1—LOCAL 2

The LOCAL 4 setting allows reception of only

the strongest stations, while lower settings let

you receive progressively weaker stations.

Selecting alternative frequencies

When the tuner can’t get good reception, the

unit automatically search for a different sta-

tion in a same network.

% Press and hold TA repeatedly to turn AF

(alternative frequency search) on or off.

Notes

! You can also turn the AF function on or off in

the menu that appears with the pressing of

FUNCTION.

! Only RDS stations are tuned in during seek

tuning or BSM when AF is on.

! When you recall a preset station, the tuner

may update the preset station with a new fre-

quency from the station’s AF list. (This is only

available when using presets on the FM1

band.) No preset number appears on the dis-

play if the RDS data for the station received

differs from that for the originally stored sta-

tion.

! Sound may be temporarily interrupted by an-

other program during an AF frequency

search.

! AF can be turned on or off independently for

each FM band.

Using PI Seek

If the tuner can’t find a suitable station, or re-

ception status becomes bad, the unit will auto-

matically search for a different station with a

same programming. During the search,

PI SEEK is displayed and the output is muted.

Using Auto PI Seek for preset stations

When preset stations cannot be recalled, as

when travelling long distances, the unit can

be set to perform PI Seek during preset recall.

! The default setting for Auto PI Seek is off.

See Switching Auto PI Seek on page 51.

Operating this unit

En

17

Section

03

Operating this unit

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 96 97

Comments to this Manuals

No comments