Pioneer KRP-600A User Manual download pdf (Page 34)

Setting up08

Note

• Using the “By Satellite” option for channel scanning may fail in

some cases. If this is the case, select “All Frequencies” or

“SMATV”.

• If you access “Satellite Setup” through “Auto Installation”, three

buttons – “Add New Channels”, “Replace Existing Channels”

and “Reset” – are unavailable.

• Selecting “SMATV” (Satellite Master Antenna Television system)

causes your flat screen TV to make an attempt to obtain all

available channels regardless of antenna setting.

• Scanning channels after changing the “Scan Type” option

causes the channel information obtained with the previous

option to disappear.

8 Select “Aerial Select” (

/

Use / to select “Single”, “DiSEqC 1”, “DiSEqC 2”, “DiSEqC 3”,

“DiSEqC 4”, “Tone Burst 1” or “Tone Burst 2”.

9 Select “Satellite Select” (

/

then ENTER).

10 Select “Satellite” (

/

then ENTER).

Information on the selected satellite appears on screen. Select an

available satellite from the list.

Units for LNB Frequency is MHz.

This option is available only if you select “By Satellite” in step 7.

Select “New 1” through “New 5” then press and hold

ENTER

display the software keyboard.

11 Select “LNB Frequency” (

/

Use / to select “Universal” (having two LNB frequencies - 9750/

10600, default) or use buttons 0 to 9 (then press

ENTER

) to enter a

frequency if you select “---”.

This option is available only when you select “All Frequencies” or

“By Satellite” in step 7.

12 Select “LNB Voltage” (

/

Use / to select “On” or “Off” (default).

Select “On” in most cases.

13 Press RETURN then select “Transponder” (

/

14 Select “Transponder Type” (

/

Use / to select “All” for all transponders of the selected

satellites (default), “One” for only one transponder, or “Manual” for

transponders specified.

15 Select “Frequency” (

/

The option selected in step 14 appears with available transponders

for the satellite selected on the satellite list in step 10.

Enter a frequency using buttons 0 to 9 (then press

ENTER

) if you

select “Manual” in step 14.

16 Select “Polarization” (

/

Use / to select “Horizontal” (default) or “Vertical”.

17 Select “Symbol Rate” (

/

Use / to select “22000” (default), “27500” or use buttons 0 to 9

(then press

ENTER

) to enter a symbol rate.

Note

• “Polarization” and “Symbol Rate” options are only available if

you select “Manual” from “Transponder Type” in step 14.

18 Press RETURN then select “Signal Check” (

/

then ENTER).

Use / to select the desired satellites from the satellite list or

transponders for the selected satellites.

Note

• If you access “Signal Check” through “Auto Installation”, the

button “Add” is unavailable (see page 49).

• Units for Transponder is MHz.

To search and register new channels, select “Add New Channels”

(see page 49).

Reset

Replace Existing Channels

Add New Channels

Scan Type : By Satellite

Aerial Select : Single

Satellite Select

Transponder

Signal Check

Satellite : Astra1

LNB Frequency : Universal

LNB Voltage : Off

Level

: 60%

Quality : 80%

Transponder Type : Manual

Frequency : ---- MHz

Polarization : Horizontal

Symbol Rate : 22000 KS/s

Add

Satellite : Astra1

Transponder : 10000

Level

88%

Quality :100%

KRP-600A_500A.book Page 34 Monday, September 8, 2008 10:31 AM

1 ... 33 34 35 ... 345

Pioneer KRP-600A User Manual Page 34

Comments to this Manuals

Pioneer KRP-600A User Manual Page 34

Comments to this Manuals

Related products and manuals for Home Theater Systems Pioneer KRP-600A