Pioneer KRP-600A User Manual download pdf (Page 62)

Useful adjustment settings11

Selecting a wide mode

The HD Wide Mode adjusts the side masks that appear in a 4:3

image. Select from “Mode 1” or “Mode 2” when “Wide-Zoom” is

selected in “Auto Size”.

1 Repeat steps 1 to 3 provided for

Switching the vertical drive

mode (AV source only)

2 Select “Side Mask” (

/

then ENTER).

3 Select “HD Wide Mode” (

/

4 Select “Mode 1” or “Mode 2” (

/

If you select “Mode 1”, Side Mask Detection is automatically set to

“WIDE 1” when side masks are detected with “Wide-Zoom” for Auto

Size setting.

If you select “Mode 2”, Side Mask Detection is automatically set to

“WIDE 2” when side masks are detected with “Wide-Zoom” for Auto

Size setting.

5 Press HOME MENU to exit the menu.

Changing the brightness at both sides

of the screen (Side Mask)

With the 4:3, FULL 14:9, or CINEMA 14:9 screen size, you can

change the brightness of the grey side masks that appear at both

sides of the screen.

1 Repeat steps 1 to 3 provided for

Switching the vertical drive

mode (AV source only)

2 Select “Side Mask“ (

/

then ENTER).

3 Select “Brightness Sync.” (

/

4 Select the desired parameter (

/

Important

• The “Auto” setting adjusts the brightness of the side masks

according to the brightness of the screen and can reduce the

possibility of image retention.

5 Press HOME MENU to exit the menu.

Room Light Sensor

This function automatically adjusts the brightness of the display

panel in accordance with the brightness level of the viewing area.

For details, use the following procedure.

1 Repeat steps 1 to 3 provided for

Switching the vertical drive

mode (AV source only)

2 Select “Room Light Sensor” (

/

then ENTER).

3 Select “Mode 1”, “Mode 2” or “Off” (

/

then ENTER).

4 Press HOME MENU to exit the menu.

Note

• As this function automatically optimizes image quality, the

process in which image settings such as brightness and tint

gradually change may be seen on the screen. This is not a

malfunction.

• If the colour sensor is not in use, adjustments are made for

“Mode 1” and “Mode 2” based on the information collected at

the Room Light Sensor.

Blue LED Dimmer

You can adjust the brightness of the Power ON indicator depending

on the brightness level of the viewing area. When “Auto” is selected,

the brightness of the indicator changes to “High”, “Mid” or “Low” to

match the brightness level of the viewing area.

1 Repeat steps 1 to 3 provided for

Switching the vertical drive

mode (AV source only)

2 Select “Blue LED Dimmer”

(/

then ENTER).

3 Select “Auto”, “High”, “Mid” or “Low”

(/

then ENTER).

4 Press HOME MENU to exit the menu.

Orbiter

This function automatically shifts the image little by little to reduce

the occurrence of the burning.

1 Repeat steps 1 to 3 provided for

Switching the vertical drive

mode (AV source only)

2 Select “Orbiter”

(/

then ENTER).

3 Select “Mode 1” or “Mode 2”

(/

then ENTER).

Item Description

Fixed

(default)

Always sets the same brightness for the grey side

masks

Auto Adjusts the brightness of the grey side masks

according to the brightness of images

Item Description

Mode 1 Automatically adjusts the picture brightness for

the best possible image quality based on the

information collected at the Room Light Sensor

and Colour Sensor

Mode 2 Automatically adjusts the picture brightness and

colouring for best image quality possible for the

viewing environment based on the information

collected at the Room Light Sensor and Colour

Sensor

Off Deactivates the Room Light Sensor function

KRP-600A_500A.book Page 62 Monday, September 8, 2008 10:31 AM

1 ... 61 62 63 ... 345

Pioneer KRP-600A User Manual Page 62

Comments to this Manuals

Pioneer KRP-600A User Manual Page 62

Comments to this Manuals

Related products and manuals for Home Theater Systems Pioneer KRP-600A