Pioneer KRP-600A User Manual download pdf (Page 76)

Using with other equipment12

Note

• Do not use any USB devices other than those specified. Using

other devices can cause a malfunction.

Readable data format

This system reads FAT16, FAT32 or NTFS.

Readable data files

Movie, music, and photo files play with the exception of Digital

Rights Management (WMDRM10) protected files.

Your flat screen TV supports a single USB device at a time. Also, the

TV does not support USB hubs.

This system may not be able to display modified or edited content

from a PC or other equipment.

Your flat screen TV supports the USB Mass Storage Class and PTP

devices.

Some digital cameras may require a setup procedure for Mass

Storage Class data transfer. The setup is done on the camera. See

the operating instructions supplied with the digital camera.

Depending on the type of your memory card or camera, some

images may fail to display.

Remove a USB device

To remove a USB device, exit the Home Media Gallery first then

disconnect the device.

Be sure to exit the Home Media Gallery screen before removing the

USB device. If you remove the USB device while the Home Media

Gallery screen is displayed, data inside the memory may be

damaged.

Do not insert or remove the USB device immediately after the

system is switched On or Off. This action may cause data inside the

memory to be damaged.

Pioneer is not liable for any loss or damage to the data inside the

USB flash drive.

Run the Home Media Gallery

1 Press HMG.

The Home Media Gallery menu appears on screen.

2 Select “Media Navigator”, “USB”, “HMG Playlist” or “HMG

Setup”.

Use the arrow buttons to highlight an option then press ENTER.

To return to the previous screen, press RETURN.

To exit Home Media Gallery, press EXIT or HMG.

Use the Media Navigator

By selecting Media Navigator, the previously selected server menu

automatically appears on the screen. When only one server is

found, the system automatically connects the server. You can also

use the TOOLS Menu to switch to another server or manually select

a server from the Server List. The screen automatically changes to

the Server List if there are no previous servers.

1 Press

HMG

The Home Media Gallery menu appears on screen.

2 Select “Media Navigator”.

Use the arrow buttons to highlight an option then press ENTER.

The Server List screen appears depending on the setting. Select a

desired server from the Server List. The file/folder configuration may

vary depending on the server selected.

3 Select the desired folder to navigate or file/content to play.

4 Press ENTER to display a subsequent screen.

A subsequent screen appears.

To return to the previous screen, press RETURN.

To exit Home Media Gallery, press EXIT or HMG.

Note

• The Media Navigator launch depends on the option selected in

“Auto Connection” (page 88). The screen displays after

selecting a server from the server list.

Navigate through a USB device’s files and folders

Like navigating through media servers, select the specific file from

a device on the USB Device screen to start an appropriate player.

For details, follow the steps below.

1 Press HMG.

The Home Media Gallery menu appears on screen.

2 Select “USB”.

Use the arrow buttons to highlight an option then press ENTER.

The USB Device screen appears. Select the device. When using a

single directory device (USB flash drive), the USB Device screen

does not appear.

Media Navigator

USB

HMG Playlist

HMG Setup

ser File

(Sample screen)

USB A

USB B

USB C

USB D

USB E

USB F

USB G

(Sample screen)

KRP-600A_500A.book Page 76 Monday, September 8, 2008 10:31 AM

1 ... 75 76 77 ... 345

Pioneer KRP-600A User Manual Page 76

Comments to this Manuals

Pioneer KRP-600A User Manual Page 76

Comments to this Manuals

Related products and manuals for Home Theater Systems Pioneer KRP-600A