Pioneer KRP-600A User Manual download pdf (Page 46)

Setting up08

Note

• When you change the Energy Save mode, you may notice a

change in the panel sound. This is normal.

• The Energy Save function can maintain efficiency of the screen

for a long period of time. Setting the Energy Save function to

“Mode1” is recommended in order to maintain the efficiency of

the screen for a long period of time.

No Signal off (AV source only)

The system will be automatically placed into the standby mode if no

signal is received for 15 minutes.

1 Repeat steps 1 to 3 provided for

Energy Save

2 Select “No Signal off” (

/

then ENTER).

3 Select “Enable” (

/

then ENTER).

4 Press HOME MENU to exit the menu.

Note

• Five minutes before the system is placed into the standby mode,

a message appears every minute.

• The system may not be placed into the standby mode when

noise signals are present at the Media Receiver after a TV

programme finishes.

No Operation off (AV source only)

The system will be automatically placed into the standby mode

when no operation is performed for three hours.

1 Repeat steps 1 to 3 provided for

Energy Save

2 Select “No Operation off” (

/

then ENTER).

3 Select “Enable” (

/

then ENTER).

4 Press HOME MENU to exit the menu.

Note

• Five minutes before the system is placed into the standby mode,

a message appears every minute.

Power Management (PC source only)

The system will be automatically placed into the standby mode

when no signal is received from the personal computer.

1 Repeat steps 1 to 3 provided for

Energy Save

2 Select “Power Management”

(/

then ENTER).

3 Select “Mode1” or “Mode2”

(/

then ENTER).

4 Press HOME MENU to exit the menu.

Note

• This function is not selectable when the PC is connected to the

HDMI terminal.

Picture Off

To save energy and extend the life of your display, have the screen

turn Off. To deactivate the screen, follow the steps below.

1 Press TOOLS.

The TOOLS Menu appears on screen.

2 Select “Picture Off” from the TOOLS Menu.

3 Press ENTER.

The screen display turns Off.

To restore the screen display, press any buttons other than i+/

i– and e.

Note

• The Picture Off setting is not memorized by the system.

No Signal off

Selections Disable

(default)

Does not place the system into the

standby mode

Enable Places the system into the standby

mode if no signal is received for 15

minutes

No Operation off

Selections Disable

(default)

Does not place the system into the

standby mode

Enable Places the system into the standby

mode if no operation is performed

for three hours

Item Description

Off (default) No power management

Mode1 • Places the system into the standby mode when

no signal is received from the personal computer

for eight minutes.

• Even when you start using the computer and a

signal is received again, the system stays off.

• The system is switched on again by pressing

STANDBY/ON on the Media Receiver or

the remote control unit.

Mode2 • Places the system into the standby mode when

no signal is received from the personal computer

for eight seconds.

• When you start using the computer and a signal

is input again, the system is switched on.

• The system is switched on again by pressing

STANDBY/ON on the Media Receiver or

the remote control unit.

KRP-600A_500A.book Page 46 Monday, September 8, 2008 10:31 AM

1 ... 45 46 47 ... 345

Pioneer KRP-600A User Manual Page 46

Comments to this Manuals

Pioneer KRP-600A User Manual Page 46

Comments to this Manuals

Related products and manuals for Home Theater Systems Pioneer KRP-600A