Pioneer VSX-920-K User Manual download pdf (Page 102)

The System Setup and Other Setup menus11

102

Speaker Setting

Use this setting to specify your speaker

configuration (size, number of speakers and

crossover frequency). It is a good idea to make

sure that the settings made in Automatically

conducting optimum sound tuning (Auto

MCACC) on page 39 are correct. Note that this

setting applies to all MCACC presets, and

cannot be set independently.

1 Select ‘

Speaker Setting

’ from the

Manual SP Setup

menu.

2 Choose the set of speakers that you want

to set, then select a speaker size.

Use / to select the size (and number) of

each of the following speakers:

• Front – Select LARGE if your front

speakers reproduce bass frequencies

effectively, or if you didn’t connect a

subwoofer. Select SMALL to send the bass

frequencies to the subwoofer.

• Center – Select LARGE if your center

speaker reproduces bass frequencies

effectively, or select SMALL to send bass

frequencies to the other speakers or

subwoofer. If you didn’t connect a center

speaker, choose NO (the center channel is

sent to the front speakers).

• FH – Select LARGE if your front height

speakers reproduce bass frequencies

effectively, or select SMALL to send bass

frequencies to the other speakers or

subwoofer. If you didn’t connect front

height speakers, choose NO (the front

height channel is sent to the front

speakers).

• FW – Select LARGE if your front wide

speakers reproduce bass frequencies

effectively, or select SMALL to send bass

frequencies to the other speakers or

subwoofer. If you didn’t connect front wide

speakers, choose NO (the front wide

channel is sent to the front speakers).

• Surr – Select LARGE if your surround

speakers reproduce bass frequencies

effectively. Select SMALL to send bass

frequencies to the other speakers or

subwoofer. If you didn’t connect surround

speakers choose NO (the sound of the

surround channels is sent to the front

speakers or a subwoofer).

• SB – Select the number of surround back

speakers you have (one, two or none).

Select LARGEx2 or LARGEx1 if your

surround back speakers reproduce bass

frequencies effectively. Select SMALLx2 or

SMALLx1 to send bass frequencies to the

other speakers or subwoofer. If you didn’t

connect surround back speakers choose

NO.

Note

1 If you select SMALL for the front speakers the subwoofer will automatically be fixed to YES. Also, the center, surround,

surround back, front height and front wide speakers can’t be set to LARGE if the front speakers are set to SMALL. In

this case, all bass frequencies are sent to the subwoofer.

2 • You can only adjust the front height speakers when Speaker System is set to Normal(SB/FH).

• If the surround speakers are set to NO, the front height speakers will automatically be set to NO.

3 • You can only adjust the front wide speakers when Speaker System is set to Normal(SB/FW).

• If the surround speakers are set to NO, the front wide speakers will automatically be set to NO.

4 • If you selected ZONE 2 or Front Bi-Amp (in Speaker system setting on page 101) you can’t adjust the surround back

settings.

• If the surround speakers are set to NO, the surround back speakers will automatically be set to NO.

• If you select one surround back speaker only, make sure that speaker is hooked up to the left surround back

terminal.

VSX-1020_SYXCN.book 102 ページ２０１０年３月１２日　金曜日　午前９時１０分

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 399 400

Comments to this Manuals

No comments

Pioneer VSX-920-K User Manual Page 102

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Pioneer VSX-920-K