Pioneer VSX-920-K User Manual download pdf (Page 105)

The System Setup and Other Setup menus 11

105

English

Français

Deutsch

Nederlands

Italiano

Español

IP Address

The IP address to be entered must be defined

within the following ranges. If the IP address

defined is beyond the following ranges, you

cannot listen to Internet radio stations.

Class A: 10.0.0.1 to 10.255.255.254

Class B: 172.16.0.1 to 172.31.255.254

Class C: 192.168.0.1 to 192.168.255.254

Subnet Mask

In case an xDSL modem or a terminal adapter

is directly connected to this receiver, enter the

subnet mask provided by your ISP on paper. In

most cases, enter 255.255.255.0.

Default Gateway

In case a gateway (router) is connected to this

receiver, enter the corresponding IP address.

Primary DNS Server/Secondary DNS Server

In case there is only one DNS server address

provided by your ISP on paper, enter it in the

‘Primary DNS Server’ field. In case there are

more than two DNS server addresses, enter

one of the other DNS server addresses in the

‘Secondary DNS Server’ field.

Proxy Hostname/Proxy Port

This setting is required when you connect this

receiver to the Internet via a proxy server. Enter

the IP address of your proxy server in the

‘Proxy Hostname’ field. Also, enter the port

number of your proxy server in the ‘Proxy Port’

field.

Tip

• Press / or the numeric buttons to enter

alphanumeric characters. To delete

alphanumeric characters entered one at a

time, press CLEAR.

1 Select ‘

IP Address, Proxy

’ from the

Network Setup

menu.

2 Select the

DHCP

setting you want.

When you select ON, the network is

automatically set up, and you do not need to

follow Steps 3. Proceed with Step 4.

If there is no DHCP server on the network and

you select ON, this receiver will use its own

Auto IP function to determine the IP address.

3 Enter the

IP Address

Subnet Mask

Default Gateway

Primary DNS Server

and

Secondary DNS Server

Press / to select a number and / to

move the cursor.

4 Select ‘

OFF

’ or ‘

’ for the Enable Proxy

Server setting to deactivate or activate the

proxy server.

In case you select ‘OFF’, proceed with Step 7.

In case you select ‘ON’, on the other hand,

proceed with Step 5.

5 Enter the address of your proxy server or

the domain name.

6 Enter the port number of your proxy

server.

7 Select ‘

’ to confirm the IP Address/

Proxy setup.

Checking the MAC address

You can check the MAC address.

• Select ‘

Information

’ from the

Network

Setup

menu.

Note

1 The IP address determined by the Auto IP function is 169.254.X.X. You cannot listen to an Internet radio station if the

IP address is set for the Auto IP function.

VSX-1020_SYXCN.book 105 ページ２０１０年３月１２日　金曜日　午前９時１０分

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 399 400

Comments to this Manuals

No comments

Pioneer VSX-920-K User Manual Page 105

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Pioneer VSX-920-K