Pioneer FH-P80BT User Manual download pdf (Page 15)

Notes

! This unit’s AF (alternative frequencies search)

function can be turned on and off. AF should

be off for normal tuning operation (refer to the

next page).

! RDS service may not be provided by all sta-

tions.

! RDS functions such as AF and TA are only ac-

tive when your radio is tuned to an RDS sta-

tion.

Storing and recalling broadcast

frequencies

You can easily store up to six broadcast fre-

quencies for later recall.

! Six stations for each band can be stored in

memory.

1 Press LIST.

Preset screen is displayed.

2 Use MULTI-CONTROL to store the se-

lected frequency in memory.

Turn to change the preset number. Press and

hold to store.

3 Use MULTI-CONTROL to select the de-

sired station.

Turn to change the station. Press to select.

# You can also change the station by pushing

MULTI-CONTROL up or down.

# To return to the ordinary display, press BAND

or LIST.

# If you do not operate the list within about 30

seconds, the display automatically returns to the

ordinary display.

Using the remote control

% When you find a frequency that you

want to store in memory, press one of pre-

set tuning buttons 1 to 6 and hold until the

preset number stops flashing.

The number you have pressed will flash in the

preset number indicator and then remain lit.

The selected radio station frequency has been

stored in memory.

The next time you press the same preset tun-

ing button the radio station frequency is re-

called from memory.

# You can also recall radio station frequencies

assigned to preset tuning numbers by pushing

MULTI-CONTROL up or down during the fre-

quency display.

Receiving PTY alarm broadcasts

When the emergency PTY code broadcasts,

the unit receives it automatically (ALARM ap-

pears). When the broadcasting ends, the sys-

tem returns to the previous source.

! An emergency announcement can be can-

celed by pressing TA.

Introduction to advanced

operations

1 Press MULTI-CONTROL to display the

main menu.

2 Use MULTI-CONTROL to select

FUNCTION.

Turn to change the menu option. Press to se-

lect.

The function menu is displayed.

3 Turn MULTI-CONTROL to select the

function.

BSM (best stations memory)—REGIONAL (re-

gional)—LOCAL (local seek tuning)—

PTY SEARCH (program type selection)—

TRAFFIC ANNOUNCE (traffic announcement

standby)—ALTERNATIVE FREQ (alternative

frequencies search)—NEWS INTERRUPT

(news program interruption)

Notes

! You can also select the function by pressing

FUNCTION on the remote control.

! To return to the ordinary display, press BAND.

Operating this unit

En

15

Section

02

Operating this unit

1 ... 14 15 16 ... 77

Comments to this Manuals

No comments