Pioneer FH-P80BT User Manual download pdf (Page 52)

Adjusting initial settings



Using the initial settings, you can customize

various system settings to achieve optimal per-

formance from this unit.

1 Function display

! Shows the function status.

1 Press SOURCE and hold until the unit

turns off.

2 Press MULTI-CONTROL and hold until

the initial setting menu appears in the dis-

play.

3 Turn MULTI-CONTROL to select one of

the initial settings.

Turn MULTI-CONTROL to switch between the

functions in the following order.

CALENDAR (calendar)—CLOCK (clock)—

OFF CLOCK (off clock)—FM STEP (FM tuning

step)—AUTO PI (auto PI seek)—AUX1 (auxili-

ary input 1)—AUX2 (auxiliary input 2)—

DIMMER (dimmer)—S/W CONTROL (rear

output and subwoofer contro ller)—MUTE

(sound muting/attenuation)—

DEMONSTRATION (feature demo)—

EVER-SCROLL (ever scroll)—TITLE (language

selection)—BT AUDIO (Bluetooth audio)—

PIN CODE INPUT (pin code input)—

EDIT DEVICE NAME (device name edit)—

BT VERSION INFO. (Bluetooth version infor-

mation)—BT RESET (Bluetooth reset)—

SOFTWARE UPDATE (software update)

Use the following instructions to operate each

particular setting.

# You can also select the function by pressing

FUNCTION on the remote control.

# To cancel initial settings, press BAND.

Setting the date

The calender display adjusted in this mode ap-

pears when the telephone source is selected

or sources and the feature demo are off.

1 Display the initial setting menu.

Refer to Adjusting initial settings on this page.

2 Use MULTI-CONTROL to select

CALENDAR.

3 Push MULTI-CONTROL left or right to

select the segment of the calendar display

you wish to set.

Pushing MULTI-CONTROL left or right will se-

lect one segment of the calendar display:

Day—Month—Year

As you select segments of the calendar dis-

play the segment selected will blink.

4 Push MULTI-CONTROL up or down to

set the date.

Pushing MULTI-CONTROL up will increase

the selected day, month or year. Pushing

MULTI-CONTROL down will decrease the se-

lected day, month or year.

Setting the clock

Use these instructions to set the clock.

1 Display the initial setting menu.

Refer to Adjusting initial settings on this page.

2 Use MULTI-CONTROL to select CLOCK.

3 Push MULTI-CONTROL left or right to

select the segment of the clock display you

wish to set.

Pushing MULTI-CONTROL left or right will se-

lect one segment of the clock display:

Hour—Minute

As you select segments of the clock display,

the selected segment blinks.

4 Push MULTI-CONTROL up or down to

put a clock right.

Initial Settings

En

52

Section

04

1 ... 51 52 53 ... 77

Comments to this Manuals

No comments