Pioneer FH-P80BT User Manual download pdf (Page 48)

Display Equalizer curve

POWERFUL Powerful

NATURAL Natural

VOCAL Vocal

CUSTOM1 Custom 1

CUSTOM2 Custom 2

FLAT Flat

S.BASS Super bass

! CUSTOM1 and CUSTOM2 are adjusted

equalizer cur ves that you create. Adjust-

ments can be made with a 7-band graphic

equalizer.

! When FLAT is selected, no supplement or

correction is made to the sound. This is

useful to check the effect of the equalizer

curves by switching alternatively between

FLAT and a set equalizer curve.

1 Display the audio menu.

Refer to Introduction of audio adjustments on

the previous page.

2 Use MULTI-CONTROL to select the gra-

phic equalizer adjustment.

EQUALIZER appears in the display.

If the equalizer curve has been previously se-

lected, the curve of that previously selected

will be displayed instead of EQUALIZER.

3 Push MULTI-CONTROL left or right to

select an equalizer curve.

Each time MULTI-CONTROL is pushed left or

right, equalizer curves are selected in the fol-

lowing order:

POWERFUL—NATURAL—VOCAL—

CUSTOM1—CUSTOM2—FLAT—S.BASS

Adjusting equalizer curves

The factory supplied equalizer curves, with the

exception of FLAT, can be adjusted to a fine

degree (nuance control).

1 Recall the equalizer curve you want to

adjust.

See Recalling equalizer curves on the previous

page.

2 Push MULTI-CONTROL up or down to

adjust the equalizer curve.

Each time MULTI-CONTROL is pushed up or

down, the equalizer curve increases or de-

creases respectively.

+6 to –4 (or –6) is displayed as the equalizer

curve is increased or decreased.

# The actual range of the adjustments are differ-

ent depending on which equalizer curve is se-

lected.

# The equalizer curve with all frequencies set to

0 cannot be adjusted.

Adjusting 7-band graphic equalizer

For CUSTOM1 and CUSTOM2 equalizer

curves, you can adjust the level of each band.

! A separate CUSTOM1 curve can be cre-

ated for each source. (The built-in CD

player and the multi-CD player are set to

the same equalizer adjustment setting

automatically.) If you make adjustments

when a curve other than CUSTOM2 is se-

lected, the equalizer curve settings will be

memorized in CUSTOM1.

! A CUSTOM2 curve can be created com-

mon to all sources. If you make adjust-

ments when the CUSTOM2 curve is

selected, the CUSTOM2 curve will be up-

dated.

1 Recall the equalizer curve you want to

adjust.

See Recalling equalizer curves on the previous

page.

2 Use MULTI-CONTROL to select

G.EQ ADJUST.

Frequency and the level (e.g., 50HZ :+4) ap-

pears in the display.

Audio Adjustments

En

48

Section

03

1 ... 47 48 49 ... 77

Comments to this Manuals

No comments