Pioneer VSX-820-K User Manual download pdf (Page 20)

Connecting your equipment03

Switching the speaker system

Three speaker system settings are possible

using the SPEAKERS button.

• Use the SPEAKERS button on the front

panel to select a speaker system setting.

Press repeatedly to choose a speaker system

option:

• SPA – Sound is output from the speakers

connected to the A speaker terminals and

PRE OUT SURR BACK/FRONT HEIGHT

(multichannel playback is possible).

• SPB – Sound is output from the two

speakers connected to speaker system B

(only stereo playback is possible).

• SPAB – Sound is output from speaker

system A, the two speakers in speaker

system B, and the subwoofer.

Multichannel sources are downmixed only

when the STEREO or ALC mode is selected

for stereo output from speaker systems A

and B.

• SP – No sound is output from the

speakers.

Making cable connections

Make sure not to bend the cables over the top

of this unit (as shown in the illustration). If this

happens, the magnetic field produced by the

transformers in this unit may cause a

humming noise from the speakers.

Important

• Before making or changing connections,

switch off the power and disconnect the

power cord from the AC outlet.

• Before unplugging the power cord, switch

the power into standby.

HDMI cables

Both video and sound signals can be transmitted

simultaneously with one cable.

If connecting the

player and the TV via this receiver, for both

connections, use HDMI cables.

Be careful to connect the terminal in the

proper direction.

Note

1 The subwoofer output depends on the settings you made in Speaker Setting on page 43. However, if SPB is selected above,

no sound is heard from the subwoofer (the LFE channel is not downmixed).

2 You can use speakers with a normal impedance between 6 Ω and 16 Ω. However, be aware that only the front speakers are set

to a value between 12 Ω and 16 Ω when you select SPAB.

SPEAKERS DIMMER DISPLAY

3 • Set the HDMI parameter in Setting the Audio options on page 38 to THRU (THROUGH) and set the input signal in Choosing

the input signal on page 41 to HDMI, if you want to hear HDMI audio output from your TV (no sound will be heard from this

receiver).

• If the video signal does not appear on your TV, try adjusting the resolution settings on your component or display. Note that

some components (such as video game units) have resolutions that may not be displayed. In this case, use a (analog)

composite connection.

• When the video signal from the HDMI is 480i, 480p, 576i or 576p, Multi Ch PCM sound and HD sound cannot be received.

HDMI cable

VSX-820_SYXCN_En.book 20 ページ２０１０年４月１２日　月曜日　午後６時５２分

1 ... 19 20 21 ... 244

Comments to this Manuals

No comments

Pioneer VSX-820-K User Manual Page 20

Comments to this Manuals

Related products and manuals for Home Theater Systems Pioneer VSX-820-K