Pioneer VSX-820-K User Manual download pdf (Page 44)

The System Setup menu06

• Center – Select LARGE if your center

speaker reproduces bass frequencies

effectively, or select SMALL to send bass

frequencies to the other speakers or

subwoofer. If you didn’t connect a center

speaker, choose NO (the center channel is

sent to the other speakers).

• Front Height

– Select LARGE if your front

height speakers reproduce bass

frequencies effectively. Select SMALL to

send bass frequencies to the other

speakers or subwoofer. If you didn’t

connect front height speakers choose NO.

• Surr – Select LARGE if your surround

speakers reproduce bass frequencies

effectively. Select SMALL to send bass

frequencies to the other speakers or

subwoofer. If you didn’t connect surround

speakers choose NO (the sound of the

surround channels is sent to the other

speakers).

• Surr. Back

– Select the number of

surround back speakers you have (one, two

or none).

Select LARGE if your surround

back speakers reproduce bass frequencies

effectively. Select SMALL to send bass

frequencies to the other speakers or

subwoofer. If you didn’t connect surround

back speakers choose NO.

• Subwoofer – LFE signals and bass

frequencies of channels set to SMALL are

output from the subwoofer when YES is

selected (see notes below). Choose the

PLUS setting if you want the subwoofer to

output bass sound continuously or you

want deeper bass (the bass frequencies

that would normally come out the front and

center speakers are also routed to the

subwoofer). If you did not connect a

subwoofer choose NO (the bass

frequencies are output from other

speakers).

3 When you’re finished, press RETURN.

You return to the Manual SP Setup menu.

Tip

• If you have a subwoofer and like lots of

bass, it may seem logical to select LARGE

for your front speakers and PLUS for the

subwoofer. This may not, however, yield the

best bass results. Depending on the

speaker placement of your room you may

actually experience a decrease in the

amount of bass due to low frequency

cancellations. In this case, try changing

the position or direction of speakers. If you

can’t get good results, listen to the bass

response with it set to PLUS and YES or the

front speakers set to LARGE and SMALL

alternatively and let your ears judge which

sounds best. If you’re having problems, the

easiest option is to route all the bass

sounds to the subwoofer by selecting

SMALL for the front speakers.

Note

1 • You can only adjust the Front Height setting when Pre Out Setting is set to Height.

• If the surround speakers are set to NO, the front height speakers will automatically be set to NO.

2 You can only adjust the Surr. Back setting when Pre Out Setting is set to Surr. Back.

3 • If the surround speakers are set to NO, the surround back speakers will automatically be set to NO.

• If you select one surround back speaker only, make sure that additional amplifier is hooked up to the PRE OUT L (Single)

terminal.

VSX-820_SYXCN_En.book 44 ページ２０１０年４月１２日　月曜日　午後６時５２分

1 ... 43 44 45 ... 244

Comments to this Manuals

No comments

Pioneer VSX-820-K User Manual Page 44

Comments to this Manuals

Related products and manuals for Home Theater Systems Pioneer VSX-820-K