Pioneer VSX-820-K User Manual download pdf (Page 47)

The System Setup menu 06

47

En

English

Français

Deutsch

Nederlands

Italiano

Español

2 Select ‘Input Assign’ from the System

Setup menu.

3 Select ‘Component Input’ from the

Input Assign menu.

4 Select the number of the component

video input to which you’ve connected

your video component.

The numbers correspond with the numbers

beside the inputs on the rear of the receiver.

5 Select the component that corresponds

with the one you connected to that input.

Select between BD, DVD, TV, DVR or OFF.

•Use / and ENTER to do this.

• If you assign a component input to a

certain function, any component inputs

previously assigned to that function will

automatically be switched off.

• Make sure you have connected the audio

from the component to the corresponding

inputs on the rear of the receiver.

6 When you’re finished, press RETURN.

You return to the Input Assign menu.

• For the assignment of the digital signal

inputs, see Choosing the input signal on

page 41.

The Pre Out Setting

Specify either using the surround back

speaker or the front height speaker

connection with the PRE OUT outputs. An

additional amplifier is required for the speaker

connection.

•Default setting: Surr. Back

1 Press on the remote control,

then press the SETUP button.

An on-screen display (OSD) appears on your

TV. Use /// and ENTER on the remote

control to navigate through the screens and

select menu items. Press RETURN to confirm

and exit the current menu.

2 Select ‘Pre Out Setting’ from the

System Setup menu.

3 Select which speaker to connect to the

PRE OUT outputs using /.

• Surr. Back – Connect the surround back

speaker.

• Height – Connect the front height speaker.

4 When you’re finished, press RETURN.

You return to the System Setup menu.

System Setup

1.Auto MCACC

2.Manual SP Setup

3.Input Assign

4.Pre Out Setting

Return

3.Input Assign

Return

a.Component Input

3a.Component Input

Return

Component–1 BD

Component–2 [ DVD ]

RECEIVER

System Setup

1.Auto MCACC

2.Manual SP Setup

3.Input Assign

4.Pre Out Setting

Return

System Setup

1.Auto MCACC

2.Manual SP Setup

3.Input Assign

4.Pre Out Setting

Return

4.Pre Out Setting

Return

Pre Out Surr. Back

VSX-820_SYXCN_En.book 47 ページ２０１０年４月１２日　月曜日　午後６時５２分 47

1 ... 46 47 48 ... 244

Comments to this Manuals

No comments