Pioneer PDP-508XDA User Manual download pdf (Page 30)

Setting up

AV Selection

Select from the seven viewing options depending on the current

environment (e.g., room brightness), the type of the current TV

programme, or the type of images input from external equipment.

1 Press HOME MENU.

2 Select “Picture“ (/ then ENTER).

3 Select “AV Selection“ (/ then ENTER).

4 Select the desired option (/ then ENTER).

For AV source

For PC source

5 Press HOME MENU to exit the menu.

Note

• You can also press AV SELECTION on the remote control to

change the viewing option.

• If you have selected “DYNAMIC”, you cannot select “Contrast”,

“Brightness”, “Colour”, “Tint”, “Sharpness”, “Pro Adjust”, and

“Reset”; these menu items are dimmed.

• If you have selected “OPTIMUM”, you cannot select “Pro

Adjust”; menu items in “Pro Adjust” are dimmed.

• As “OPTIMUM” automatically optimizes image quality, the

process in which image settings such as brightness and tint

gradually change may be seen on the screen. This is not a

malfunction.

• When “OPTIMUM” is selected, images are reproduced based

on the information collected at the Room Light Sensor as well,

regardless of its setting (“On” or “Off”) for the “Option” menu.

Basic picture adjustments

Adjust the picture to your preference for the chosen AV Selection

option (except DYNAMIC).

1 Press HOME MENU.

2 Select “Picture“ (/ then ENTER).

3 Select an item to be adjusted (/ then ENTER).

For PC source or when the Home Gallery function is on, the

following screen appears.

4 Select the desired level (/).

Item Description

OPTIMUM Automatically adjusts the brightness of the image to

the optimum level in accordance with the brightness

level of the viewing area.

The setting is shared by the external inputs and TV

input sources.

STANDARD For a highly defined image in a normally bright room.