Pioneer PDP-508XDA User Manual download pdf (Page 34)

Setting up

7 Press HOME MENU to exit the menu.

Using the 3DYC and I-P Mode

1 Press HOME MENU.

2 Select “Picture“ (/ then ENTER).

3 Select “Pro Adjust“ (/ then ENTER).

4 Select “Others“ (/ then ENTER).

5 Select “3DYC” or “I-P Mode” (/ then ENTER).

6 Select the desired parameter (/ then ENTER).

7 Press HOME MENU to exit the menu.

Note

• The 3DYC setting is ineffective when SECAM, PAL-M, PAL-N or

4.43 NTSC signals are input.

• For the I-P Mode, the individual parameters are not selectable

for the following input signals: 480p, 576p, 720p, 1080p.

• The I-P Mode setting is disabled if you use an external input

source and select “On” for “Game Control Pref” on the “Option”

menu.

• For the 3DYC, the individual parameters are selectable only

when you have selected the analogue tuner, or you have

selected “INPUT 1”, “INPUT 2”, “INPUT 3” or “INPUT 6” as the

input source and there is a video signal present.

Comparing picture adjustments on the

screen

During picture adjustments, you can quickly refer to the image

previously set in the same parameter, allowing you to easily

compare and select the preferred image quality.

1 Press HOME MENU.

2 Select “Picture” (/ then ENTER).

3 Select an item to be adjusted (/ then ENTER).

4 While performing adjustment, press BLUE on the remote

control unit.

“Before” displays and the image adjusted last time appears for

comparison.

5 Press the button again to return to the newly adjusted

image.

Each press of the button toggles between “Before” and “After”.

6 Repeat steps 1 and 5 for other parameters.

7 Press HOME MENU to exit the menu.

Caution

• If you exit the menu by pressing HOME MENU or no operation

is performed for 60 seconds, all the parameter settings

displayed last are stored in memory.

• If you want to exit the menu without performing the

adjustments (or leaving the settings disabled) on the “After”

screen, switch to “Before” and then exit.

Note

• You cannot adjust any item while on the “Before” screen. A

warning message appears.

• When you switch to another parameter, make sure to change

the display from “Before” to “After” first, otherwise you cannot

select “Before”. A warning message appears if you don’t.

• If you exit the selection from the “Before” screen, the previous

entry is stored in the memory and the button no longer works.

• If you exit the selection from the “After” screen, the new entry

is stored in the memory and the button no longer works.

• If you move and change the “AV Selection” parameter, the new

entry in the current parameter is stored in the memory and the

button continues to work.

• You cannot compare images between different parameters on

the “AV Selection” menu (“STANDARD” and “MOVIE”, for

example).

• When you select this function, “Intelligent Mode” for “Pro

Adjust” on the “Picture” menu, “OPTIMUM” on the “AV

Selection” menu, and “Room Light Sensor” on the “Option”

menu are all set to off and image quality returns to default

settings.

• This function is not selectable:

- when you select “AV Selection”,

- when you select “Yes” or “No” on the confirmation screen for

“Reset” from the “Picture” menu or

- when you select a menu from the PC source

Mosquito NR

Reduces mosquito noise in DVD and high-definition images, resulting in noise-

free images

Selections Off Deactivates Mosquito NR

On Activates Mosquito NR

3DYC

Optimizes characteristics for separating brightness signals and colour signals.

This works for both video and still images.

Selections Off Deactivates 3DYC

High Enhanced 3DYC

Mid Standard 3DYC

Low Moderate 3DYC

I-P Mode

Performs optimum conversion from interlace signals to progressive signals.

This works for both video and still images.

Selections 1 Optimum for video images

2 Standard setting

3 Optimum for still images

Before

1 ... 33 34 35 ... 76

Comments to this Manuals

No comments

Pioneer PDP-508XDA User Manual Page 34

Comments to this Manuals

Related products and manuals for Televisions Pioneer PDP-508XDA