Pioneer PDP-508XDA User Manual download pdf (Page 48)

Useful adjustment settings

Note

• You cannot set the Side Mask detection to “On” or “Off” when

“Off” is selected in “Auto Size”.

• The Side Mask detection does not operate on 4:3 content

displayed in SD signals.

• The Side Mask detection is canceled when you switch the

screen size. To restore the Side Mask detection, select another

input source or place the plasma television into standby, then

turn the power on again.

• “Auto” will appear on the channel display when this function is

on.

• Set the Side Mask detection function to “On”, the High

Definition 16:9 aspect ratio images containing side masks will

be detected and the side masks will be added automatically or

the image displayed in full screen, leading to more effective

countermeasures taken for the screen burning.

• Detection errors may occur depending on the HD contents. In

case a detection error occurs, manually change the screen size

to the desired size.

Changing the brightness at both sides of

the screen (Side Mask)

With the 4:3, FULL 14:9, or CINEMA 14:9 screen size selected, you

can change the brightness of the grey side masks that appear at

both sides of the screen.

1 Press HOME MENU.

2Select “Option“ (/ then ENTER).

3 Select “Side Mask“ (/ then ENTER).

4 Select “Brightness Sync.“ (/).

5 Select the desired parameter (/ then ENTER).

Important

The “Auto” setting adjusts the brightness of the side masks

according to the brightness of the screen and can reduce the

possibility of image retention.

6 Press HOME MENU to exit the menu.

Room Light Sensor

This function automatically adjusts the brightness of the display

panel in accordance with the brightness level of the viewing area.

For details, use the following procedure.

1 Press HOME MENU.

2 Select “Option” (/ then ENTER).

3 Select “Room Light Sensor” (/ then ENTER).

4 Select “On” or “Off” (/ then ENTER).

5 Press HOME MENU to exit the menu.

Note

• When you have selected “OPTIMUM” on the “AV Selection”

menu, the Room Light Sensor function will stay “On” even if

you select “Off” in step 4.

• This function is not available when PC signals are received.

• As this function automatically optimizes image quality, the

process in which image settings such as brightness and tint

gradually change may be seen on the screen. This is not a

malfunction.

Blue LED Dimmer

You can adjust the brightness of the POWER ON indicator

depending on the brightness level of the viewing area. When

“Auto” is selected, the brightness of the indicator changes to

“High”, “Mid” or “Low” to match the brightness level of the viewing

area.

1 Press HOME MENU.

2 Select “Option” (/ then ENTER).

3 Select “Blue LED Dimmer” (/ then ENTER).

4 Select “Auto”, “High”, “Mid” or “Low” (/ then ENTER).

5 Press HOME MENU to exit the menu.

Item Description

Fixed (default) Always sets the same brightness for the grey side masks

Auto Adjusts the brightness of the grey side masks according to

the brightness of images

Item Description

On Activates the Room Light Sensor function

Off Deactivates the Room Light Sensor function

1 ... 47 48 49 ... 76

Comments to this Manuals

No comments

Pioneer PDP-508XDA User Manual Page 48

Comments to this Manuals

Related products and manuals for Televisions Pioneer PDP-508XDA