Pioneer AVIC-X3-II User Manual download pdf (Page 118)

2 Touch a or b to adjust front/rear

speaker balance.

Each time you touch a or b moves the front/

rear speaker balance towards the front or the

rear.

Front:15 to Rear:15 is displayed as the front/

rear speaker balance moves from front to rear.

Both Front:0 and Rear:0 are the proper set-

ting when only two speakers are used.

When the rear output setting is Rear SP

Sub. W, you cannot adjust front/rear speaker

balance.

= Refer to Setting the rear output and subwoo-

fer controller on page 124.

3 Touch c or d to adjust left/right speak-

er balance.

Each time you touch c or d moves the left/

right speaker balance towards the left or the

right.

Left:9 to Right:9 is displayed as the lef t/right

speaker balance moves from left to right.

Adjusting equaliser curves

You can adjust the currently selected equaliser

curve setting as desired. Adjusted equaliser

curve settings are memorised in Custom1.

p If you make Custom2 adjustments,

Custom2 curve is updated.

p You can adjust the centre frequency, level

and the Q factor (curve characteristics) of

each currently selected curve band (Low/

Mid/High).

! Band:

You can select the equaliser band.

! Frequency:

You can select which frequency to be set as

the centre frequency.

! Level:

You can select the decibel (dB) level of the

selected EQ.

! Q:

You can select the details of the curve char-

acteristics.

1 Touch [EQ Menu] in Sound menu.

2 Touch [Customize].

3 Touch c or d to select the equaliser

band to adjust.

Each time you touch c or d selects equaliser

bands in the following order:

Low — Mid — High

4 Touch c or d to select the desired fre-

quency.

Touch c or d until the desired frequency ap-

pears in the display.

Low: 40 — 80 — 100 — 160 (Hz)

Mid: 200 — 500 — 1K — 2K (Hz)

High: 3.15K — 8K — 10K — 12.5K (Hz)

5 Touch c or d to adjust the level of the

equaliser band.

Each time you touch c or d increases or de-

creases the level of the equalisation band. +12

to -12 is displayed as the level is increased or

decreased.

6 Touch c or d to select the desired Q

factor.

Touch c or d until the desired Q factor ap-

pears in the display.

Wide2 — Wide1 — Narrow1 — Narrow2

p If you make adjustments, Custom1 curve is

updated.

Setting the simulated sound stage

You can select the desired effect from various

simulated sound stage, such as Music Studio

or Dynamic Theater. You can also adjust a lis-

tener positioning effect.

Customising the AV Source Setting

Engb

118

Chapter

09

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 171 172

Comments to this Manuals

No comments