Pioneer AVIC-X3-II User Manual download pdf (Page 92)

Selecting alternative frequencies

If you are listening to a broadcast and the re-

ception becomes weak or there are other pro-

blems, the navigation system will

automatically search for a different station in

the same network that is broadcasting a stron-

ger signal.

p AF is on as a default.

% Touch [AF] in Function menu.

Touching [AF] switches between [On] and

[Off].

p Only RDS stations are tuned in during seek

tuning or BSM when AF is on.

p When you recall a preset station, the tuner

may update the preset station with a new

frequency from the station’s AF list. (This is

only available when using presets on FM1

or FM2 bands.) No preset number appears

on the display if the RDS data for the sta-

tion received differs from that for the origin-

ally stored station.

p Sound may be temporarily interrupted by

another programme during an AF fre-

quency search.

p AF can be turned on or off independently

for each FM band.

Using PI Seek

If the unit fails to find a suitable alternative fre-

quency, or if you are listening to a broadcast

and the reception becomes weak, the naviga-

tion system will automatically search for a dif-

ferent station with the same programming.

During the search, PI SEEK is displayed and

the output is muted. The muting is discontin-

ued after completion of the PI Seek, whether

or not a different station is found.

Using Auto PI Seek for preset stations

When preset stations cannot be recalled, as

when travelling long distances, the unit can

be set to perform PI Seek during preset recall.

p The default setting for Auto PI Seek is off.

= For details, refer to Switching Auto PI seek

on page 123.

Limiting stations to regional

programming

When AF is used to automatically retune fre-

quencies, the regional function limits the se-

lection to stations broadcasting regional

programmes.

% Touch [Regional] in Function menu.

Touching [Regional] switches between [On]

and [Off].

p Regional programming and regional net-

works are organised differently depending

on the country (i.e., they may change ac-

cording to the time, country or broadcast

area).

p The preset number may disappear on the

display if the tuner tunes in a regional sta-

tion that differs from the originally set sta-

tion.

p The regional function can be turned on or

off independently for each FM band.

Receiving traffic announcements

TA (traffic announcement standby) lets you re-

ceive traffic announcements automatically, no

matter what source you are listening to. TA

can be activated for both a TP station (a sta-

tion that broadcasts traffic information) or an-

other enhanced network’s TP station (a station

carrying information that cross-references TP

stations).

1 Tune in a TP station or another en-

hanced network’s TP station.

When you are tuned into a TP station or an-

other enhanced network’s TP station the

or indicator will light.

2 Touch [TA] in Function menu to turn

traffic announcement standby on.

appears in the display. The tuner will

standby for traffic announcements. If you

turned TA function on while tuned in to

neither a TP station nor another enhanced net-

work’s TP station, the

indicator lights.

To turn traffic announcements standby off,

touch [TA] again.

Using the AV Source (Built-in DVD Drive and Radio)

Engb

92

Chapter

07

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 171 172

Comments to this Manuals

No comments