Pioneer AVIC-X3-II User Manual download pdf (Page 124)

% Touch [Auto PI] in Initial menu.

Touching [Auto PI] switches between [On]

and [Off].

Setting the rear output and

subwoofer controller

This navigation system’s rear output (rear

speaker leads output and RCA rear output)

can be used for full-range speaker

(Rear SP Full) or subwoofer (Rear SP Sub. W)

connection. If you switch the rear output set-

ting to Rear SP Sub. W, you can connect a

rear speaker lead directly to a subwoofer with-

out using an auxiliary amp. Initially, the navi-

gation system is set for rear full-range speaker

connection (Rear SP Full). When rear output is

connected to full-range speakers (when

Rear SP Full is selected), you can connect the

RCA subwoofer output to a subwoofer. In this

case, you can select whether to use the sub-

woofer controller’s (low pass filter, phase)

built-in Preout Sub. W or the auxiliary

Preout Full.

1 Touch [Rear SP] in Initial menu.

2 Touch [Rear SP] to switch the rear out-

put setting.

When no subwoofer is connected to the rear

output, select Full.

When a subwoofer is connected to the rear

output, select Sub. W.

p When the rear output setting is Sub. W,

you cannot change the subwoofer control-

ler.

3 Touch [Preout] to switch the subwoofer

output or non fading output.

p Even if you change this setting, there is no

output unless you turn [Non Fading]or

[Sub Woofer]inSound menu [On].

= For details, refer to Using non fading output

on page 119.

= For details, refer to Using subwoofer output

on page 119.

p If you change the subwoofer controller

(Rear SP), the subwoofer output

(Sub Woofer) and non fading output

(Non Fading)inSound menu return to the

factory settings.

p Both rear speaker leads output and RCA

rear output are switched simultaneously in

this setting.

Editing the PIN code

You can edit the PIN code you like. Use this

function when you need to change the PIN

code from the default setting.

1 Touch [PIN Edit] in Initial menu.

2 Touch number key to enter the new PIN

code.

Version of the Bluetooth module

System (microprocessor) version

PIN code

Bluetooth Device (BD) address

3 Touch [Enter] to fix the new PIN code.

p The default setting of the PIN code is 0000.

Switching the sound muting/

attenuation

Sound from this system is muted, attenuated

or mixed automatically in the following cases:

! When a call is made or received using a

mobile phone connected to navigation sys-

tem.

! When the voice guidance is output.

p The sound muting/attenuation function

does not work when you use a mobile

phone connected to the navigation system

via Bluetooth wireless technology.

Customising the AV Source Setting

Engb

124

Chapter

09

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 171 172

Comments to this Manuals

No comments