Pioneer DEH-P510UB User Manual download pdf (Page 24)

Introduction of audio

adjustments



1 Audio display

Shows the audio adjustment status.

1 Press MULTI-CONTROL to display the

main menu.

2 Use MULTI-CONTROL to select AUDIO.

Turn to change the menu option. Press to se-

lect.

The audio menu is displayed.

3 Turn MULTI-CONTROL to select the

audio function.

Turn MULTI-CONTROL to switch between the

audio functions in the following order.

Fader (balance adjustment)—Powerful (gra-

phic equalizer adjustment)—50Hz (7-band

graphic equalizer adjustment)—Loudness

(loudness)—SubWoofer1 (subwoofer on/off

setting)—SubWoofer2 (subwoofer setting)—

Bass (bass boost)—HPF (high pass filter)—

SLA (source level adjustment)

# You can select the SubWoofer2 only when

subwoofer output is turned on in SubWoofer1.

# When selecting FM as the source, you cannot

switch to SLA.

# To return to the display of each source, press

BAND/ESC.

# If you do not operate functions except for

50Hz within about 30 seconds, the display is

automatically returned to the ordinary display.

Using balance adjustment

You can change the fader/balance setting so

that it can provide the ideal listening environ-

ment in all occupied seats.

1 Use MULTI-CONTROL to select Fader in

the audio function menu.

Refer to Introduction of audio adjustments on

this page.

# If the balance setting has been previously ad-

justed, Balance will be displayed.

2 Push MULTI-CONTROL up or down to

adjust front/rear speaker balance.

Each time MULTI-CONTROL is pushed up or

down, the front/rear speaker balance moves

towards the front or rear.

Front 15 to Rear 15 is displayed as the front/

rear speaker balance moves from front to rear.

# F/R 0 is the proper setting when only two

speakers are used.

# When the rear output setting is Rear SP :S/W,

you cannot adjust front/rear speaker balance.

Refer to Setting the rear output and subwoofer

controller on page 30.

3 Push MULTI-CONTROL left or right to

adjust left/right speaker balance.

Each time MULTI-CONTROL is pushed lef t or

right, the left/right speaker balance moves to-

wards the left or right.

Left 15 to Right 15 is displayed as the left/

right speaker balance moves from left to

right.

Using the equalizer

The equalizer lets you adjust the equalization

to match the car’s interior acoustic character-

istics as desired.

Recalling equalizer curves

There are seven stored equalizer curves which

you can easily recall at any time. Here is a list

of the equalizer curves.

Display Equalizer curve

Powerful Powerful

Natural Natural

Vocal Vocal

Custom1 Custom 1

Audio Adjustments

En

24

Section

03

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 217 218

Comments to this Manuals

No comments