Pioneer PDP-428XG User Manual download pdf (Page 45)

Using with other equipment

English

5 Press HOME MENU to exit the menu.

Note

• The INPUT 4 and INPUT 5 video signals are not output from the

MONITOR OUT jack regardless of this setting.

Using the HDMI Input

The INPUT 3, INPUT 4 and INPUT 5 terminals are HDMI terminals

to which digital video and audio signals can be input. To use the

HDMI terminals, activate the terminal and specify the types of

video and audio signals to be received from the connected

equipment. For the types of these signals, see the operation

manual that came with the connected equipment.

Before starting the menu, press INPUT 3, INPUT 4 or INPUT 5 on

the remote control unit or press INPUT on the plasma television to

select “INPUT 3”, “INPUT 4” or “INPUT 5”.

For audio, the system supports the following:

•Linear PCM (STEREO 2ch)

• Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz

HDMI Control supported

The plasma television supports the HDMI Control functions. By

connecting devices that support the HDMI Control functions to the

plasma television, you can control the connected device(s) from

the plasma television or remote control unit of the plasma

television. See Using the HDMI Control on Chapter 11.

Deep Color supported

Deep Color means the color depth that describes the number of

bits used to represent the color of a single pixel in a bitmapped

image. Besides the conventional RGB/YCbCr16 bit/20 bit/24 bit

signals, the plasma television also supports RGB/YCbCr30 bit/36

bit signals. This enables finer, minute color reproduction when a

device that supports Deep Color signals is connected to the

plasma television. When Deep Color signals are received, the color

depth appears on the channel display.

Note

• It may take a short while until the image is displayed,

depending on the equipment connected.

• Make sure to use an HDMI compliant cable.

• When inputting 1080p signals, we recommend you use an

HDMI cable that supports HDMI Category 2.

• When connecting a PC to the HDMI terminal, use the HDMI

compliant PC or video card.

• When connecting a PC to the HDMI terminal using a DVI

output terminal, the plasma television may not display

properly. If that is the case, consult with your PC manufacturer.

• PC picture and/or sound may not be displayed or heard

properly depending on the PC used.

Item Description

Always Output Outputs composite video and audio signals no matter

which input source is selected

INPUT 1 Prohibit Does not output composite video and audio signals

when “INPUT 1” is selected

INPUT 2 Prohibit Does not output composite video and audio signals

when “INPUT 2” is selected

INPUT 3 Prohibit Does not output composite video and audio signals

when “INPUT 3” is selected

INPUT 4 Prohibit Does not output composite video and audio signals

when “INPUT 4” is selected

INPUT 5 Prohibit Does not output composite video and audio signals

when “INPUT 5” is selected

INPUT 6 Prohibit Does not output composite video and audio signals

when “INPUT 6” is selected

Video signals supported

720 (1440) x 576i@50 Hz

720 x 576p@50 Hz

1280 x 720p@50 Hz

1920 x 1080i@50 Hz

720 (1440) x [email protected] Hz/60 Hz

720 x [email protected] Hz/60 Hz

1280 x [email protected] Hz/60 Hz

1920 x [email protected] Hz/60 Hz

1920 x 1080p@24 Hz

1920 x 1080p@50 Hz

1920 x 1080p@60 Hz

PC signals supported

640 x 480 (VGA) 60 Hz

800 x 600 (SVGA) 60 Hz

1024 x 768 (XGA) 60 Hz

1360 x 768 (Wide - XGA) 60 Hz

1280 x 1024 (SXGA) 60 Hz

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 265 266

Comments to this Manuals

No comments

Pioneer PDP-428XG User Manual Page 45

Comments to this Manuals

Related products and manuals for Televisions Pioneer PDP-428XG