Controls and displays03
10
En
Chapter 3:
Controls and displays
Front panel
1
POWER
OFF
ON
1
2
STANDBY
indicator
3Display
Tip
• Liquid Crystal Display
The LCD used in this unit has a tendency to
change color in response to the
surrounding temperature. The display’s
color tone may turn gray or its ability to
switch between displayed information may
slow down when the room is not at
optimum temperature, or when the unit
has been operating for a long period of
time. However, these are only temporary
symptoms and regular functionality will be
restored once the unit returns to optimum
temperature.
4
RDS
indicator
Lights when an RDS broadcast is received, and
flashes during RDS search.
5
TUNED
indicator
Lights when a station is properly tuned in.
6
STEREO
indicator
Lights red when a stereo broadcast is received.
Goes off when a monaural broadcast is
received. Lights blue when the MPX mono
mode is selected.
ONOFF
POWER
STANDBY
F3
RDS TUNED STEREO
BAND
DISPLAY AUTO PRESET
MENU
TUNING/PRESET
1211
3 54
1
2 6 7 8 9
10
Note
1 • Remember that even when the unit is in the standby mode, it remains connected to the AC line voltage. Be sure to unplug
the power cord whenever leaving your home for vacations or when otherwise not using the unit for extended periods of time.
• When the unit is in the standby mode, if the power is turned off by pressing the main unit’s POWER button, the power will
not turn on if the button is pressed again.
To turn on the power in this case, press either the remote control unit’s button or a different button (other than the POWER
button) on the main unit.
• When the unit is in the standby mode, if the power is turned off by unplugging the power cord, the power will not turn merely
by reconnecting the power cord.
To turn on the power in this case, reconnect the power cord and then press either the remote control unit’s button or a
different button (other than the POWER button) on the main unit.
01_F-F3_EN.book 10 ページ 2007年9月3日 月曜日 午後1時57分
Comments to this Manuals