Pioneer DEH-P9800BT User Manual download pdf (Page 21)

Storing the strongest

broadcast frequencies

BSM (best stations memory) lets you automa-

tically store the six strongest broadcast fre-

quencies under preset tuning buttons 1–6.

Once stored you can tune in to those frequen-

cies with the touch of button.

1 Use MULTI-CONTROL to select BSM in

the function menu.

BSM appears in the display.

2 Press MULTI-CONTROL to turn BSM on.

Searching is displayed. While Searching is

displayed, the six strongest broadcast frequen-

cies will be stored under preset tuning num-

bers 1–6 in the order of their signal strength.

When finished, the preset channel list ap-

pears.

# To cancel the storage process, press

MULTI-CONTROL.

3 Use MULTI-CONTROL to select the de-

sired station.

Turn to change the station; press to select.

# You can also change the station by pushing

MULTI-CONTROL up or down.

Note

Storing broadcast frequencies with BSM may re-

place broadcast frequencies you have saved

using buttons 1–6.

Selecting stations from the

preset channel list

The preset channel list lets you see the list of

preset stations and select one of them to re-

ceive.

1 Press LIST to switch to the preset chan-

nel list mode during the frequency display.

2 Use MULTI-CONTROL to select the de-

sired station.

Turn to change the station; press to select.

# You can also change the station by pushing

MULTI-CONTROL up or down.

# If you do not operate the list within about 30

seconds, the preset channel list mode is can-

celed automatically.

Notes

! You can also recall radio station frequencies

assigned to preset tuning numbers by push-

ing MULTI-CONTROL up or down during the

frequency display.

! You can also recall radio station frequencies

assigned to preset tuning numbers by press-

ing one of the preset tuning buttons 1–6 on

the remote control.

Tuning in strong signals

Local seek tuning lets you tune in only those

radio stations with sufficiently strong signals

for good reception.

1 Use MULTI-CONTROL to select Local in

the function menu.

Local appears in the display.

2 Press MULTI-CONTROL to turn local

seek tuning on.

Local seek sensitivity (e.g., Level 2) appears in

the display.

# To turn local seek tuning off, press

MULTI-CONTROL again.

3 Push MULTI-CONTROL left or right to

set the sensitivity.

There are four levels of sensitivity for FM and

two levels for MW/LW:

FM: Level 1—Level 2 —Level 3—Level 4

MW/LW: Level 1—Level 2

The Level 4 setting allows reception of only

the strongest stations, while lower settings let

you receive progressively weaker stations.

Tuner

En

21

English

Section

04

1 ... 20 21 22 ... 233

Comments to this Manuals

No comments