Pioneer DEH-P9800BT User Manual download pdf (Page 82)

Using the position selector

One way to assure a more natural sound is to

clearly position the stereo image, putting you

right in the center of the sound field. The posi-

tion selector function lets you automatically

adjust the speakers’ output levels and inserts

a delay time to match the number and posi-

tion of occupied seats.

1 Use MULTI-CONTROL to select Position.

Position appears in the display.

2 Push MULTI-CONTROL left, right, up or

down to select a listening position.

Direction Display Position

Left Front Left Front seat left

Right Front Right Front seat right

Up Front Front seats

Down All All seats

# To cancel the selected listening position, push

MULTI-CONTROL in the same direction again.

Using balance adjustment

You can change the fader/balance setting so

that it can provide you an ideal listening envir-

onment in all occupied seats.

1 Use MULTI-CONTROL to select Fader.

Fader appears in the display.

# If the balance setting has been previously ad-

justed, Balance will be displayed.

2 Push MULTI-CONTROL up or down to

adjust front/rear speaker balance.

Each time MULTI-CONTROL is pushed up or

down, the front/rear speaker balance moves

towards the front or rear.

Front 25 to Rear 25 is displayed as the front/

rear speaker balance moves from front to rear.

# Front/Rear 0 is the proper setting when only

two speakers are used.

3 Push MULTI-CONTROL left or right to

adjust left/right speaker balance.

Each time MULTI-CONTROL is pushed left or

right, the left/right speaker balance moves to-

wards the left or right.

Left 25 to Right 25 is displayed as the left/

right speaker balance moves from left to

right.

Using the time alignment

The time alignment lets you adjust the dis-

tance between each speaker and the listening

position.

1 Use MULTI-CONTROL to select

TA Mode.

TA Mode appears in the display.

2 Push MULTI-CONTROL left or right to

select the time alignment.

Each time MULTI-CONTROL is pushed left or

right, time alignment is selected in the follow-

ing order:

Initial (initial)—Custom (custom)—Auto TA

(auto-time alignment)—OFF (off)

! Initial is the factory supplied time align-

ment.

! Custom is an adjusted time alignment that

you can create for yourself.

! Auto TA is the time alignment created by

auto TA and EQ. (Refer to Auto TA and EQ

(auto-time alignment and auto-equalizing)

on page 89.)

# Please set Auto TA appears. This indicates

that you cannot select Auto TA if auto TA and EQ

has not been carried out.

Audio Adjustments

En

82

Section

14

1 ... 81 82 83 ... 233

Comments to this Manuals

No comments