Pioneer PRV-9000 User Manual download pdf (Page 114)

PRV-9000 Operating Instructions

When recording a dual-mono signal in Video or VR level MN32 (does not

apply if recording through the DV input) mode from an external source, record

either the L (left) or R (right) audio channel.

Using VR mode with the level set to something other than MN32 causes both

channels to record, thus supporting channel switching during playback.

DV Input:

If the camcorder uses 32kHz/12-bit sound when connected to the recorder’s

DV IN/OUT port on the front panel, this option must be set. The default

setting is Stereo1.

Some digital camcorders have two stereo tracks for audio, real-time sound

and overdubbing after shooting a scene. The Stereo1 setting selects the track

recorded while shooting. Stereo2 uses the overdubbed sound track.

Tuner Audio Level:

If the audio from the display device’s built-in tuner seems louder than the

volume during disc playback, adjust this setting to Minimum. However, the

default setting is the standard volume.

9.1.6 Audio Out Settings

Audio Out provides settings for the following options:

 Digital – default: ON

 Dolby Digital – default: Dolby Digital

 DTS – default: OFF

 96kHZ PCM – default: 96kHz to 48kHz

 MPEG – default: MPEG to PCM

 Audio DRC – default: OFF

Digital Out:

Unless there is a specific need for this feature to be turned OFF, leave the

setting to ON (default).

Note: Optical and coaxial outputs may only be switched as a set.

Dolby Digital Out:

106

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 149 150

No comments

Pioneer PRV-9000 User Manual Page 114