Pioneer PRV-9000 User Manual download pdf (Page 84)

PRV-9000 Operating Instructions

6. Press ENTER to calculate the disc space needed for the timer

recordings already present.

7. Verify that Rec OK

appears next to each timer recording entry.

If the timer program is too long for the disc then Time Over

appears

next to the entry. However, the timer entry records as much of the

program as possible until the disc is full.

8. Make adjustments as necessary.

9. Press ENTER to confirm adjusted lines.

10. Press SETUP to exit the Timer Program screen and return to the main

menu.

With a daily or weekly program, the Rec OK message appears next to the

last entry that can fit on the loaded disc (up to a maximum of one month in

advance).

If Optimize Disc is active (ON) during a timer recording, the PRV-9000

adjusts the recording quality to fit as much of the sequence as possible on to

the disc. However, if the timer entry is still too long for the available disc

space, the Time Over message appears.

6.1.3 Check Timer Recording Details

To verify that a timer program is ready to record, refer to the directions below.

1. Stop the recorder.

2. Press FUNCTION on the front panel of the recorder until PROGRAM 1

appears in the display.

If there are no timer programs, PROGRAM NON appears in the display.

3. Turn the Smart Jog on the front panel to display the timer information.

PROGRAM 1

DATE 8<WED>

START 11:15am

STOP 1:15pm

MODE SP 2

4. Wait ten seconds for the data to disappear, returning the recorder to

normal operation.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 149 150

No comments

Pioneer PRV-9000 User Manual Page 84