Pioneer PRV-9000 User Manual download pdf (Page 81)

PRV-9000 Operating Instructions

Because the Timer is stored on the disc, the recording program activates

automatically every time the disc is loaded in to the recorder. Follow the

directions below to prepare a disc for storing a timer recording program. If the

disc is already prepared for disc timer recording, skip to Program A Disc

Timer Recording in the instructions below.

Note: Before programming for disc timer, set the disc to VR format.

Prepare Media for Disc Timer Programming:

1. Load a recordable disc in to the recorder.

If loading an unformatted DVD-RW disc, it is automatically formatted as

a VR disc. This process requires approximately 40 seconds.

2. Press SETUP to display the Setup menu.

If disc timer recording is active, the first menu item is Disc Timer Rec.

3. Highlight Disc Setup from the Setup menu by using the joystick.

4. Confirm that Basic is highlighted.

5. Use the joystick to move to Disc Timer Rec on the Basic submenu.

6. Set Disc Timer Rec to ON.

Use the joystick to highlight ON then press ENTER.

Note: Ejecting the disc before programming at least one complete entry causes

the Disc Timer Rec option to revert automatically to OFF.

7. Press SETUP to exit the Disc Setup menu.

Program A Disc Timer Recording:

1. Load a recordable disc in to the recorder.

If loading an unformatted DVD-RW disc, it is automatically formatted as

a VR disc. This process requires approximately 40 seconds.

2. Press SETUP to display the Setup menu.

If disc timer recording is active, the first menu item is Disc Timer Rec.

3. Confirm that Disc Timer Rec is highlighted on the menu.

4. Press ENTER to access the Disc Timer Rec menu.

The Timer Recording program appears on screen with 8 entry lines

available.

5. Select an entry line by moving the joystick down/up.

6. Use the joystick to access an entry line.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 149 150

No comments

Pioneer PRV-9000 User Manual Page 81