Pioneer PRV-9000 User Manual download pdf (Page 42)

PRV-9000 Operating Instructions

Follow the directions below to restore default settings.

1. Power ON the recorder.

2. Remove any discs left in the tray.

3. Close the tray.

4. Hold down the STOP button on the recorder’s front panel.

5. Press the STANDBY/ON button (front panel).

6. Continue holding down the STOP button until the display on the front

panel clears.

The display shows only placeholders for the time.

7. Power ON the recorder and operate as normal.

All settings have returned to the default/factory settings.

4.2 Using the Built-in TV Tuner

4.2.1 Changing TV Channels

To change the channel when a disc is not playing, use the number pad or the

CHANNEL button on the remote or use the SMART JOG on the front panel.

Note: Channels programmed through the antenna are numbered 2 through 69 and

cable channels are numbered 2 through 125.

Remote Control – Number Pad: Input the channel then press ENTER.

Ex: Select Channel 4 – Press the digit 4 then press ENTER.

Select Channel 39 – Press the digit 3 then the digit 9. Press ENTER.

As an alternative method for two-digit numbers, press the _/_ _ button

followed by the two-digit channel number.

Remote Control – Channel button: Press the CHANNEL + or – button to

scroll through the channels.

Front Panel – Smart Jog: Press the FUNCTION button until CHANNEL?

appears in the display. Turn the Smart Jog wheel to change the channel.

4.2.2 Changing Audio Channels

Some TV programs are broadcast with both a main and a secondary audio

channel (SAP). Use the Audio button to change the audio playback track.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 149 150

No comments

Pioneer PRV-9000 User Manual Page 42