Pioneer PRV-9000 User Manual download pdf (Page 144)

PRV-9000 Operating Instructions

3. Why does the disc automatically eject after closing the disc tray?

 Confirm that the disc is aligned in the tray properly with the label facing

up.

 Remove the disc and clean the recording/recorded surface.

 Verify that the region code is compatible with the PRV-9000 recorder.

4. Why won’t my disc play?

 The media surface may contain dust or smudges. Clean the disc and

retry.

 Verify that a region code on the disc matches the region code on the

recorder.

 Check that the disc is aligned properly on the tray and that the label

facing up.

 Condensation may have formed within the recorder. Allow the unit to

stabilize at the current room temperature for one to two hours before

attempting to play the disc.

5. Where did my settings go?

 If the unit is unplugged or there is a power failure while the recorder is

ON, all settings return to the original default values. Returning the

recorder to Standby mode before unplugging the unit saves your settings.

6. Why did my screen go blank at the same time that all the buttons

stopped working?

 The recorder has a command conflict. Press the STOP button on the

front panel of the unit and restart playback.

7. What does this symbol,

, mean?

 The symbol means that the operation you want to perform is unavailable

on that disc. The recorder is functioning properly.

8. What does this symbol,

, mean?

 The symbol means that the recorder prohibits the operation you want to

perform. The recorder is functioning properly.

9. Why did the remote control stop working?

 Change the angle to test the operating range.

 When this recorder is connected to other Pioneer devices through the

CONTROL IN/OUT ports, point the remote control at the other device(s).

 The remote control’s ID number must match the recorder’s ID number.

136

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 150

No comments

Pioneer PRV-9000 User Manual Page 144