Pioneer SC-LX73 User Manual Page 107
- Page / 146
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
The Advanced MCACC menu
11
107
En
4Press
RETURN
to go back to the
MCACC Data
Check
menu, repeating steps 2 and 3 to check other
settings.
5 When you’re finished, press
RETURN
.
You will return to the Home Menu.
Speaker Setting
Use this to display the speaker size and number of
speakers. See
Speaker Setting
on page 111 for more on
this.
1 Select ‘
Speaker Setting
’ from the
MCACC Data
Check
menu.
2 Select the channel you want to check.
Use / to select the channel. The corresponding
channel on the layout diagram is highlighted.
Channel Level
Use this to display the level of the various channels. See
Channel Level on page 112 for more on this.
1 Select ‘
Channel Level
’ from the
MCACC Data
Check
menu.
2 When ‘
MCACC
’ is highlighted, use
/
to select
the MCACC preset you want to check.
The level of the various channels set at the selected
MCACC preset is displayed. ‘---’ is displayed for channels
that are not connected.
Speaker Distance
Use this to display the distance from the different
channels to the listening position. See Speaker Distance
on page 112 for more on this.
1 Select ‘
Speaker Distance
’ from the
MCACC Data
Check
menu.
2 When ‘
MCACC
’ is highlighted, use
/
to select
the MCACC preset you want to check.
The distance from the various channels set at the
selected MCACC preset is displayed. ‘---’ is displayed for
channels that are not connected.
Standing Wave
Use this to display the standing wave related adjustment
values for the various MCACC memories. See Standing
Wave on page 104 for more on this.
1 Select ‘
Standing Wave
’ from the
MCACC Data
Check
menu.
2 When ‘
Filter Channel
’ is highlighted, use
/
to
select the channel for which you want to check
standing wave control.
The standing wave related calibration value for the
selected channel stored at the selected MCACC preset
and its graph are displayed.
3Press
to highlight ‘
MCACC
’, then use
/
to
select the MCACC preset you want to check.
Acoustic Cal EQ
Use this to display the calibration values for the
frequency response of the various channels set in the
different MCACC presets. See Acoustic Calibration EQ
Adjust on page 104 for more on this.
1Select ‘
Acoustic Cal EQ
’ from the
MCACC Data
Check
menu.
2 When ‘
Ch
’ is highlighted, use
/
to select the
channel.
The calibration value for the frequency response of the
selected channel stored at the selected MCACC preset
and its graph are displayed.
3Press
to highlight ‘
MCACC
’, then use
/
to
select the MCACC preset you want to check.
Group Delay
(SC-LX83 only)
Use this to display the calibrated speaker group delay
results. See Better sound using Phase Control and Full
Band Phase Control (SC-LX83 only) on page 60 for more on
this.
1Select ‘
Group Delay
’ from the
MCACC Data Check
menu.
2 When ‘
Channel
’ is highlighted, use
/
to select
the channel you want to check.
The result of group delay calibration for the selected
channel is displayed.
When measurements have been performed with Full
Auto MCACC selected at Advanced MCACC or with ALL
or Full Band Phase Ctrl selected when Auto MCACC is
selected, the graph before group delay calibration is also
displayed.
When After is selected at Calibration, the group delay
after calibration is displayed. Compared to when Before
is selected, with After there is less difference in the delay
between frequency bands and the group delay between
the different channels is uniform, allowing you to check
the full band phase control effect.
No Data is displayed if the selected group delay has not
been measured.
- Operating Instructions 1
- IMPORTANT 2
- VENTILATION CAUTION 3
- Contents 4
- (In case of SC-LX73) 6
- 11 The Advanced MCACC menu 6
- 13 Additional information 6
- Checking what’s in the box 9
- Installing the receiver 9
- Loading the batteries 9
- Before you start 10
- Controls and displays 11
- AV RECEIVER 12
- 1. Adv MCACC 12
- STANDBY/ON 17
- Connecting your equipment 19
- Connecting the RF adapter 20
- Placing the speakers 22
- Connecting the speakers 23
- Front height setup 26
- Front wide setup 26
- Speaker B setup 26
- Bi-Amping setup 26
- ZONE 2 setup 26
- About HDMI 27
- Connecting AM/FM antennas 35
- MULTI-ZONE setup 36
- LAN interface 37
- Bluetooth 38
- Connecting a USB device 39
- MCACC output 39
- Connecting an IR receiver 40
- Plugging in the receiver 41
- Basic Setup 42
- The Input Setup menu 44
- Basic playback 46
- Playing an iPod 47
- Playing a USB device 48
- Listening to the radio 51
- Listening to your system 56
- Listening in stereo 58
- Full Band Phase Control 60
- Server Name 62
- About list of Internet radio 63
- About network playback 64
- Software update 65
- About playable file formats 66
- Glossary 67
- Control with HDMI function 68
- HDMI Setup 69
- Before using synchronization 69
- About synchronized operations 70
- Setting the PQLS function 71
- Using other functions 72
- Setting the Video options 74
- Using the MULTI-ZONE controls 75
- Web Control 77
- Main ZONE ZONE 3 77
- Resetting the system 78
- (In case of SC-LX83) 79
- AUTO/ALC/ 81
- Direct function 83
- Controlling components 84
- FM UNBAL 75 AM LOOP 87
- OUTPUT 5 V 87
- 150 mA MAX 87
- Usable range 91
- Signal reflection 91
- For safe use 91
- Setting the backlight mode 95
- Using multi operations 96
- Using System off 96
- The Advanced MCACC menu 100
- Manual MCACC setup 102
- Checking MCACC Data 106
- Data Management 108
- RECEIVER 110
- Speaker Setting 111
- Speaker system setting 111
- Channel Level 112
- Speaker Distance 112
- Network Setup menu 113
- IP address/Proxy setting 114
- Checking the MAC address 114
- Network Standby 114
- The Other Setup menu 115
- Flicker Reduction Setup 116
- RF Remote Setup 116
- EXTENSION Setup 116
- Multi Channel Input Setup 116
- Additional information 117
- Troubleshooting 118
- Surround sound formats 130
- About THX 130
- About iPod 132
- About FLAC 132
- Preset code list 134
- (SC-LX73 only) 134
- Specifications 141
- Cleaning the unit 142
- Radio wave caution 142
- PIONEER CORPORATION 146
Related products and manuals for Home Theater Systems Pioneer SC-LX73
Home Theater Systems Pioneer DCS-590 User Manual
(126 pages)
(126 pages)
(104 pages)
© 2020, manymanuals.com. All rights reserved. | 2.630 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals