Pioneer SC-LX73 User Manual Page 59
- Page / 146
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Listening to your system
06
59
En
Using Stream Direct
Use the Stream Direct modes when you want to hear the
truest possible reproduction of a source. All unnecessary
signal processing is bypassed, and you’re left with the
pure analog or digital sound source. Processing differs
depending on the input signal and whether or not
surround back speakers are connected. For details, see
Auto Surround, ALC and Stream Direct with different input
signal formats on page 133.
1 Set the remote control to the receiver operation
mode.
2 While listening to a source, press
AUTO/ALC/
DIRECT
(
AUTO SURR
/
ALC
/
STREAM DIRECT
) to select
the mode you want.
Check the digital format indicators in the front panel
display to see how the source is being processed.
• AUTO SURROUND – See Auto playback on page 56.
• ALC – Listening in Auto level control mode (page 56).
• DIRECT – Plays back sound from the source with the
least modification next to PURE DIRECT. With
DIRECT, the only modifications added to PURE
DIRECT playback are calibration of the sound field by
the MCACC system and the Phase Control effect.
• PURE DIRECT – Plays back unmodified sound from
source with only minimal digital treatment. No sound
is output from the Speaker B in this mode.
• OPTIMUM SURR (SC-LX83 only) – Listening in
Optimum Surround mode (page 56).
Selecting MCACC presets
• Default setting: MEMORY 1
If you have calibrated your system for different listening
positions, you can switch between settings to suit the
kind of source you’re listening to and where you’re sitting
(for example, watching movies from a sofa, or playing a
video game close to the TV).
1 Set the remote control to the receiver operation
mode.
2 While listening to a source, press
MCACC
.
Press repeatedly to select one of the six MCACC presets
1
.
See Data Management on page 108 to check and
manage your current settings.
Choosing the input signal
On this receiver, it is possible to switch the input signals
for the different inputs as described below.
2
1 Set the remote control to the receiver operation
mode.
2Press
SIGNAL SEL
to select the input signal
corresponding to the source component.
Each press cycles through the options as follows:
• AUTO – The receiver selects the first available signal
in the following order: HDMI; DIGITAL; ANALOG.
• ANALOG – Selects an analog signal.
• DIGITAL – Selects an optical or coaxial digital signal.
• HDMI – Selects an HDMI signal.
3
• PCM – For PCM input signals.
4
The receiver selects
the first available signal in the following order: HDMI;
DIGITAL.
When set to DIGITAL, HDMI or AUTO (only selected
DIGITAL or HDMI), the indicators light according to the
signal being decoded (see Display on page 15).
Better sound using Phase Control
This receiver’s Phase Control feature uses phase
correction measures to make sure your sound source
arrives at the listening position in phase, preventing
unwanted distortion and/or coloring of the sound.
Note
1 • These settings have no effect when headphones are connected.
• You can also press / to select the MCACC preset.
2 • This receiver can only play back Dolby Digital, PCM (32 kHz to 192 kHz), DTS (including DTS 96/24) and WMA9 Pro digital signal formats.
The compatible signals via the HDMI terminals are: Dolby Digital, DTS, WMA9 Pro, PCM (32 kHz to 192 kHz), Dolby TrueHD, Dolby Digital Plus,
DTS-EXPRESS, DTS-HD Master Audio and SACD.
• You may get digital noise when an LD, CD, DVD or BD player compatible with DTS is playing an analog signal. To prevent noise, make the
proper digital connections (page 33) and set the signal input to DIGITAL.
• Some DVD players don’t output DTS signals. For more details, refer to the instruction manual supplied with your DVD player.
3 When the HDMI audio output parameter is set to THROUGH, the sound will be heard through your TV, not from this receiver.
4 • This is useful if you find there is a slight delay before AUTO recognizes the PCM signal on a CD, for instance.
• When PCM is selected, noise may be output during playback of non-PCM sources. Please select another input signal if this is a problem.
- Operating Instructions 1
- IMPORTANT 2
- VENTILATION CAUTION 3
- Contents 4
- (In case of SC-LX73) 6
- 11 The Advanced MCACC menu 6
- 13 Additional information 6
- Checking what’s in the box 9
- Installing the receiver 9
- Loading the batteries 9
- Before you start 10
- Controls and displays 11
- AV RECEIVER 12
- 1. Adv MCACC 12
- STANDBY/ON 17
- Connecting your equipment 19
- Connecting the RF adapter 20
- Placing the speakers 22
- Connecting the speakers 23
- Front height setup 26
- Front wide setup 26
- Speaker B setup 26
- Bi-Amping setup 26
- ZONE 2 setup 26
- About HDMI 27
- Connecting AM/FM antennas 35
- MULTI-ZONE setup 36
- LAN interface 37
- Bluetooth 38
- Connecting a USB device 39
- MCACC output 39
- Connecting an IR receiver 40
- Plugging in the receiver 41
- Basic Setup 42
- The Input Setup menu 44
- Basic playback 46
- Playing an iPod 47
- Playing a USB device 48
- Listening to the radio 51
- Listening to your system 56
- Listening in stereo 58
- Full Band Phase Control 60
- Server Name 62
- About list of Internet radio 63
- About network playback 64
- Software update 65
- About playable file formats 66
- Glossary 67
- Control with HDMI function 68
- HDMI Setup 69
- Before using synchronization 69
- About synchronized operations 70
- Setting the PQLS function 71
- Using other functions 72
- Setting the Video options 74
- Using the MULTI-ZONE controls 75
- Web Control 77
- Main ZONE ZONE 3 77
- Resetting the system 78
- (In case of SC-LX83) 79
- AUTO/ALC/ 81
- Direct function 83
- Controlling components 84
- FM UNBAL 75 AM LOOP 87
- OUTPUT 5 V 87
- 150 mA MAX 87
- Usable range 91
- Signal reflection 91
- For safe use 91
- Setting the backlight mode 95
- Using multi operations 96
- Using System off 96
- The Advanced MCACC menu 100
- Manual MCACC setup 102
- Checking MCACC Data 106
- Data Management 108
- RECEIVER 110
- Speaker Setting 111
- Speaker system setting 111
- Channel Level 112
- Speaker Distance 112
- Network Setup menu 113
- IP address/Proxy setting 114
- Checking the MAC address 114
- Network Standby 114
- The Other Setup menu 115
- Flicker Reduction Setup 116
- RF Remote Setup 116
- EXTENSION Setup 116
- Multi Channel Input Setup 116
- Additional information 117
- Troubleshooting 118
- Surround sound formats 130
- About THX 130
- About iPod 132
- About FLAC 132
- Preset code list 134
- (SC-LX73 only) 134
- Specifications 141
- Cleaning the unit 142
- Radio wave caution 142
- PIONEER CORPORATION 146
Related products and manuals for Home Theater Systems Pioneer SC-LX73
Home Theater Systems Pioneer DCS-590 User Manual
(126 pages)
(126 pages)
(104 pages)
© 2020, manymanuals.com. All rights reserved. | 1.139 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals