Pioneer SC-LX73 User Manual Page 36

  • Download
  • Add to my manuals
  • Print
  • Page
    / 146
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 35
Connecting your equipment
03
36
En
Connecting external antennas
To improve FM reception, connect an external FM
antenna to FM UNBAL 75 Ω.
To improve AM reception, connect a 5 m to 6 m length of
vinyl-coated wire to the
AM LOOP
terminals without
disconnecting the supplied AM loop antenna.
For the best possible reception, suspend horizontally
outdoors.
MULTI-ZONE setup
This receiver can power up to three independent systems
in separate rooms after you have made the proper MULTI-
ZONE connections.
Different sources can be playing in three zones at the
same time or, depending on your needs, the same source
can also be used. The main and sub zones have
independent power (the main zone power can be off while
one (or both) of the sub zones is on) and the sub zones
can be controlled by the remote or front panel controls.
Making MULTI-ZONE connections
It is possible to make these connections if you have a
separate TV and speakers for your primary (ZONE 2) sub
zone, and a separate TV and a separate amplifier (and
speakers) for your secondary (ZONE 3) sub zone. You will
also need a separate amplifier if you are not using the
MULTI-ZONE setup using speaker terminals (ZONE 2) on
page 37 for your primary sub zone. There are two primary
sub zone setups possible with this system. Choose
whichever works best for you.
MULTI-ZONE listening options
The following table shows the signals that can be output
to ZONE 2 and ZONE 3
1
:
Basic MULTI-ZONE setup (ZONE 2)
Connect a separate amplifier to the
AUDIO ZONE 2
OUT
jacks and a TV monitor to the
VIDEO ZONE 2 OUT
2
jack, both on this receiver.
You should have a pair of speakers attached to the sub
zone amplifier as shown in the following illustration.
ANTENNA
FM UNBAL 75 AM LOOP
75 Ω coaxial cable
ANTENNA
FM UNBAL 75 AM LOOP
Outdoor antenna
Indoor antenna
(vinyl-coated wire)
5 m to 6 m
Sub Zone Input functions available
ZONE 2 DVD, TV/SAT, DVR/BDR, VIDEO, HOME MEDIA
GALLERY (SC-LX83 only), INTERNET RADIO (SC-
LX73 only), iPod/USB, CD, CD-R/TAPE, TUNER,
ADAPTER PORT
(Outputs analog audio, composite video and
component video (SC-LX83 only).)
ZONE 3 Same as ZONE 2 above.
(Outputs analog audio and composite video.)
Note
1 For the INTERNET RADIO (SC-LX73 only), HOME MEDIA GALLERY (SC-LX83 only) and iPod/USB inputs, it is not possible use the same input
in ZONE 2 and ZONE 3 simultaneously.
2 SC-LX83 only:
COMPONENT VIDEO ZONE 2 OUT can be used to output clear images.
• The GUI screen is not displayed if only the COMPONENT VIDEO ZONE 2 OUT jack is connected.
• The video convert function does not work for ZONE 2. Connect the composite video and component video to the same types of jacks for the
inputs and outputs.
RS-232C
HDMI
ASSIGNABLE
COMPONENT VIDEO
ASSIGNABLE
MONITOR OUT
ZONE 2 OUT
IN
Y
ANTENNA
FM UNBAL 75 AM LOOP
ZONE2
OUT
ZONE3
OUT
D
P
R
P
B
1
INBD
IN
1
IN
2
1 4
(
DVD
)
IN
2
(
DVR/BDR
)
IN
3
(
VIDEO
)
CONTROL
CU-RF100
IR
IN
IN
IN
OUT
OUT
1
2
(
OUTPUT 5 V
150 mA MAX
)
RL
AUDIO IN
VIDEO IN
Main zoneSub zone (ZONE 2)
Page view 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 145 146

Comments to this Manuals

No comments