Pioneer PRV-9000 User Manual download pdf (Page 52)

PRV-9000 Operating Instructions

From the Front Panel:

To use the buttons on the front of the recorder, follow the directions below.

1. Begin playing a disc.

2. Press the FUNCTION button until the STEP? appears on the display.

3. Turn the SMART JOG dial to advance or back up one frame at a time.

4. Press PLAY to resume normal playback.

Normal playback may automatically resume when reaching a new chapter. Test

the disc for this function before playing the material in a professional setting.

4.8 Recording Options

When preparing to record video, check the following guidelines before

proceeding.

 CD-R and CD-RW blank discs are incompatible with this recorder.

 Use DVD-R (General) and DVD-RW discs that are designated for video use.

 Fingerprints, small scratches or other marks on a disc may affect playback

and/or recording performance.

 Pioneer takes no responsibility for recording failures due to power

fluctuations, defective discs, or damage to the recorder.

The PRV-9000 can play three different types of DVD disc:

 DVD-Video discs

 DVD-RW discs

 DVD-R discs

DVD-R discs are always Video format rather than VR format. This is the same

format as pre-recorded (Hollywood release) discs. Once your disc is recorded

and finalized, the disc may be played on a standard DVD player that recognizes

DVD-R media.

DVD-RW discs are either Video format or Video Recording (VR) format. The

PRV-9000’s default mode is Video. The recording mode is closely related to the

disc format. If the disc is VR format, the recorder must be in VR mode. If the

disc is Video format then the recorder must be set to Video mode.

Note: DVD-Video is unsupported as a recording option; however, DVD-Video discs are

playable on this recorder.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 149 150

No comments

Pioneer PRV-9000 User Manual Page 52