Pioneer PRV-9000 User Manual download pdf (Page 57)

PRV-9000 Operating Instructions

4.9 Initializing a Disc

When recording to a DVD-R disc, set the mode to Video. For DVD-RW discs, the

default is VR mode but can be switched to Video mode. Change the mode from

the Disc Setup menu.

Note: Changing the mode on a DVD-RW disc erases all existing material from the disc.

The following directions refer to DVD-RW media but apply to DVD-R discs as

well when choosing Video in step 3.

1. Press SETUP to access the Setup menu.

2. Highlight Disc Setup to reveal the Disc Setup menu by using the joystick.

3. Press ENTER to confirm your selection.

4. Highlight Initialize from the Disc Setup menu by using the joystick.

5. Choose the appropriate mode from the submenu.

* Video mode

* VR mode (default)

6. Use the joystick to highlight Start from the submenu.

7. Press ENTER to begin initializing the disc.

The initialization process may take up to one minute to complete.

4.10 Initializing Recording Modes

The PRV-9000 and the recordable media

must have compatible formats. If the disc is

formatted to Video mode then the recorder

must be set to Video mode before beginning

a recording session. If the disc is a VR mode

DVD-RW then the recorder must be set to

VR mode.

Disc Setup menu / Video mode option:

SETUP

stick / ENTER

REC MODE

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 149 150

No comments

Pioneer PRV-9000 User Manual Page 57