Pioneer PRV-9000 User Manual download pdf (Page 24)

PRV-9000 Operating Instructions

2.2.4 Connect to Other A/V Sources – Satellite/Cable

The PRV-9000 supports several AV products including VCRs, satellite tuners

and camcorders.

Connect to a VCR / Satellite Receiver:

1. Connect the VCR’s (or receiver)

Video Output to the Video Input.

S-Video In with an S-Video cable

(not provided) or Video In jack

with supplied cable

2. Connect the VCR’s audio outputs

to Audio IN L/R with a standard

stereo audio cable (not provided).

Connect to a Cable Box or Satellite Receiver:

If the cable box or satellite receiver provides less than five scrambled

channels, refer to the following diagram for assistance. For systems with six

or more scrambled channels, please refer to the following section.

1. Connect RF cables as shown with the

antenna/cable line connected to the

PRV-9000.

2. Connect the recorder’s Audio Output 2

to the TV’s audio input using a stereo

audio cable (not supplied).

3. Connect the recorder’s Video Output 2

to the TV’s video input using a BNC

cable (not supplied).

4. Connect audio/video outputs from the

cable box/satellite tuner to the

recorder’s INPUT 2/AUTO REC posts

using a stereo audio cable and a BNC

video cable, respectively.

(enables watching/recording scrambled

television broadcasts)

The diagram shows standard video connections. As an alternative, you can

use the S-Video or Component Video (BNC) connections if available.

The PRV-9000 provides a Cable TV Input for recording programs from cable.

Please refer to your cable box instructions for any additional configuration

information.

Note: For high-quality playback, send audio and video signals through an AV receiver.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 149 150

No comments

Pioneer PRV-9000 User Manual Page 24